New - BiERBACH GmbH & Co. KG Befestigungstechnik
New - BiERBACH GmbH & Co. KG Befestigungstechnik
New - BiERBACH GmbH & Co. KG Befestigungstechnik
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Fastening Technique<br />
frame mounting with bracket fastening of fire extinguisher mounting with bracket<br />
40.46<br />
heavy duty<br />
drill/hammer-in/finished<br />
R Nylon anchor-free direct fastening<br />
in concrete or brickwork<br />
Euro concrete anchor*<br />
accessory<br />
MPA<br />
Geprüft vom staatl. Materialprüfungsamt<br />
Dortmund<br />
d<br />
d<br />
l<br />
<strong>BiERBACH</strong> ®<br />
Euro concrete anchor* type »A«<br />
Nylon anchor-free direct fastening in concrete or brickwork.<br />
Steel, galvanized and yellow chromatized, flat countersunk head.<br />
These sturdy <strong>BiERBACH</strong> ® anchors allow multi-purpose direct fastenings in<br />
brickwork, concrete as well as solid and natural stone. Standard, time<br />
intensive plug fastenings are now almost unnecessary. Reduced installation<br />
times mean cost savings and therefore competitive advantages for tradecraft<br />
and industry.<br />
The range of utilization is very variable and anchors with different head forms<br />
have been developed so that for all installation cases an optimum fastener<br />
can be chosen.<br />
The specially developed profile of the shaft guarantees a high pullout value<br />
in the above mentioned construction materials.<br />
After pre-drilling with drill Ø 6 mm or 8 mm, the precisely engineered point<br />
allows easy driving-in of the fastener without damaging the drill hole rim. The<br />
pre-drilled hole has to be approx. 15 mm deeper than the drive-in depth<br />
which should be about 40 mm in solid material.<br />
Typical application fields:<br />
This solid anchor type is specially suited for fastenings of batten frames on<br />
concrete, solid and natural stone. <strong>Co</strong>mbined with clamp plates, wire mesh<br />
coverings on eroded rock formations to be redeveloped can be perfectly<br />
fastened.<br />
Item dim. mm drill head contents item €<br />
no. d l Ø Ø pcs./PU group 100 pcs.<br />
boxed; packing unit = 4 boxes<br />
610 040 6,1 40 6,0 13 100/400 15<br />
610 060 6,1 60 6,0 13 100/400 15<br />
610 080 6,1 80 6,0 13 100/400 15<br />
610 100 6,1 100 6,0 13 100/400 15<br />
610 120 6,1 120 6,0 13 100/400 15<br />
610 140 6,1 140 6,0 13 100/400 15<br />
610 160 6,1 160 6,0 13 100/400 15<br />
610 180 6,1 180 6,0 13 50/200 15<br />
610 200 6,1 200 6,0 13 50/200 15<br />
610 300 8,1 100 8,0 17 100/400 15<br />
610 320 8,1 120 8,0 17 100/400 15<br />
610 340 8,1 140 8,0 17 100/400 15<br />
610 360 8,1 160 8,0 17 100/400 15<br />
610 380 8,1 180 8,0 17 50/200 15<br />
610 399 8,1 200 8,0 17 50/200 15<br />
Special sizes upto 380 mm length can be produced for economical order<br />
quantities.<br />
fitting accessory:<br />
<strong>BiERBACH</strong> ® clamp plate<br />
Steel, hot-dip galvanized, with reinforced grooving<br />
For fastening of wire mesh to rock formations or concrete with the<br />
<strong>BiERBACH</strong> ® concrete anchor.<br />
Item dim. mm for contents item €<br />
no. d screw Ø pcs. group 100 pcs.<br />
boxed<br />
278 017 65 6,0-8,0 250 15<br />
* A <strong>BiERBACH</strong> ® product engineered for the whole European market.