- Page 1 and 2: Junos ® OS Interfaces Fundamentals
- Page 3 and 4: Abbreviated Table of Contents About
- Page 5 and 6: Table of Contents About This Guide
- Page 7 and 8: Tracing Operations of the pppd Proc
- Page 9 and 10: Applying Policers . . . . . . . . .
- Page 11 and 12: Part 4 Configuring Serial Interface
- Page 13 and 14: Copyright © 2012, Juniper Networks
- Page 15 and 16: Copyright © 2012, Juniper Networks
- Page 17 and 18: Copyright © 2012, Juniper Networks
- Page 19 and 20: Copyright © 2012, Juniper Networks
- Page 21 and 22: Copyright © 2012, Juniper Networks
- Page 23: Copyright © 2012, Juniper Networks
- Page 27 and 28: List of Figures Part 2 Router Inter
- Page 29 and 30: List of Tables About This Guide . .
- Page 31 and 32: About This Guide This preface provi
- Page 33 and 34: Using the Indexes • MX Series •
- Page 35 and 36: Table 1: Notice Icons Icon Meaning
- Page 37 and 38: or are covered under warranty, and
- Page 39 and 40: PART 1 Interfaces Fundamentals Conf
- Page 41 and 42: CHAPTER 1 Interfaces Fundamentals C
- Page 43 and 44: Copyright © 2012, Juniper Networks
- Page 45 and 46: Copyright © 2012, Juniper Networks
- Page 47 and 48: Copyright © 2012, Juniper Networks
- Page 49 and 50: Copyright © 2012, Juniper Networks
- Page 51 and 52: Copyright © 2012, Juniper Networks
- Page 53 and 54: Copyright © 2012, Juniper Networks
- Page 55 and 56: Copyright © 2012, Juniper Networks
- Page 57 and 58: Copyright © 2012, Juniper Networks
- Page 59 and 60: Copyright © 2012, Juniper Networks
- Page 61 and 62: Copyright © 2012, Juniper Networks
- Page 63 and 64: PART 2 Router Interfaces Configurat
- Page 65 and 66: CHAPTER 2 Understanding Router Inte
- Page 67 and 68: • Understanding Services Interfac
- Page 69 and 70: Related Documentation For informati
- Page 71 and 72: Table 3: Supported Routing Engines
- Page 73 and 74: Related Documentation Table 3: Supp
- Page 75 and 76:
Copyright © 2012, Juniper Networks
- Page 77 and 78:
Displaying Internal Ethernet Interf
- Page 79 and 80:
Understanding Transient Interfaces
- Page 81 and 82:
Related Documentation Container Int
- Page 83 and 84:
Interface Encapsulations Overview T
- Page 85 and 86:
Table 4: Encapsulation Support by I
- Page 87 and 88:
Table 4: Encapsulation Support by I
- Page 89 and 90:
Table 4: Encapsulation Support by I
- Page 91 and 92:
Table 4: Encapsulation Support by I
- Page 93 and 94:
Table 4: Encapsulation Support by I
- Page 95 and 96:
Related Documentation You configure
- Page 97 and 98:
• coc12—Channelized OC12 IQ int
- Page 99 and 100:
• pd—Interface on the rendezvou
- Page 101 and 102:
interface. A nonconcatenated (that
- Page 103 and 104:
Table 5: FPC Numbering for T640 Rou
- Page 105 and 106:
Copyright © 2012, Juniper Networks
- Page 107 and 108:
Copyright © 2012, Juniper Networks
- Page 109 and 110:
CHAPTER 3 Configuring Physical Inte
- Page 111 and 112:
Copyright © 2012, Juniper Networks
- Page 113 and 114:
Copyright © 2012, Juniper Networks
- Page 115 and 116:
Copyright © 2012, Juniper Networks
- Page 117 and 118:
Copyright © 2012, Juniper Networks
- Page 119 and 120:
Related Documentation • t3-option
- Page 121 and 122:
Table 9: Statements for Physical In
- Page 123 and 124:
Table 9: Statements for Physical In
- Page 125 and 126:
Table 9: Statements for Physical In
- Page 127 and 128:
Table 9: Statements for Physical In
- Page 129 and 130:
Table 9: Statements for Physical In
- Page 131 and 132:
Table 9: Statements for Physical In
- Page 133 and 134:
Table 9: Statements for Physical In
- Page 135 and 136:
Table 9: Statements for Physical In
- Page 137 and 138:
Example: Specifying an Interface Ra
- Page 139 and 140:
Copyright © 2012, Juniper Networks
- Page 141 and 142:
. ge-1/MAX_PICS/0 ... ge-1/max_pics
- Page 143 and 144:
## '256' was expanded from interfac
- Page 145 and 146:
The interface node present under au
- Page 147 and 148:
When the Services Router applies th
- Page 149 and 150:
The description can be a single lin
- Page 151 and 152:
sizes by interface type, and Table
- Page 153 and 154:
Table 12: Media MTU Sizes by Interf
- Page 155 and 156:
Table 15: Media MTU Sizes by Interf
- Page 157 and 158:
Copyright © 2012, Juniper Networks
- Page 159 and 160:
Table 21: Encapsulation Overhead by
- Page 161 and 162:
Because tunnel services interfaces
- Page 163 and 164:
• CCC version (extended-vlan-ccc)
- Page 165 and 166:
Encapsulation Capabilities • Circ
- Page 167 and 168:
To configure a CHAP access profile,
- Page 169 and 170:
ppp-options { chap { access-profile
- Page 171 and 172:
On each physical interface with PPP
- Page 173 and 174:
Monitoring a PPP Session local-name
- Page 175 and 176:
Copyright © 2012, Juniper Networks
- Page 177 and 178:
Configuring the Interface Speed CHA
- Page 179 and 180:
NOTE: Half-duplex mode is not suppo
- Page 181 and 182:
Configuring Keepalives By default,
- Page 183 and 184:
Related Documentation serial PICs (
- Page 185 and 186:
threshold bytes; } In the rate stat
- Page 187 and 188:
of a line break or a signal corrupt
- Page 189 and 190:
Interface Diagnostics Copyright ©
- Page 191 and 192:
NOTE: BERT is supported on the PDH
- Page 193 and 194:
} } Tracing Operations of an Indivi
- Page 195 and 196:
Enabling Unidirectional Traffic Flo
- Page 197 and 198:
Copyright © 2012, Juniper Networks
- Page 199 and 200:
CHAPTER 4 Configuring Logical Inter
- Page 201 and 202:
Copyright © 2012, Juniper Networks
- Page 203 and 204:
vci vpi-identifier.vci-identifier;
- Page 205 and 206:
Table 26: Statements for Logical In
- Page 207 and 208:
Table 26: Statements for Logical In
- Page 209 and 210:
Table 26: Statements for Logical In
- Page 211 and 212:
logical unit number must be 0. Fram
- Page 213 and 214:
Configuring a Point-to-Point Connec
- Page 215 and 216:
Configuring the Interface Bandwidth
- Page 217 and 218:
• A logical interface cannot have
- Page 219 and 220:
Configuring the PPP Clear Loop Dete
- Page 221 and 222:
Configuring a Default PAP Password
- Page 223 and 224:
You can include this statement at t
- Page 225 and 226:
CHAPTER 5 Configuring Protocol Fami
- Page 227 and 228:
Copyright © 2012, Juniper Networks
- Page 229 and 230:
IPv6 Overview Copyright © 2012, Ju
- Page 231 and 232:
Copyright © 2012, Juniper Networks
- Page 233 and 234:
Related Documentation • interface
- Page 235 and 236:
Related Documentation • so-1/1/0
- Page 237 and 238:
NOTE: The option to negotiate an IP
- Page 239 and 240:
NOTE: For interfaces with PPP encap
- Page 241 and 242:
You can include this statement at t
- Page 243 and 244:
Example: Configuring the Preferred
- Page 245 and 246:
Disabling the Removal of Address an
- Page 247 and 248:
interface, lo0. By default, the pri
- Page 249 and 250:
Copyright © 2012, Juniper Networks
- Page 251 and 252:
Applying Hierarchical Policers on E
- Page 253 and 254:
CoS Configuration of Forwarding Cla
- Page 255 and 256:
Configuring a Color-Blind trTCM You
- Page 257 and 258:
} Copyright © 2012, Juniper Networ
- Page 259 and 260:
When an FBF filter is installed as
- Page 261 and 262:
Configuring Unicast RPF Copyright
- Page 263 and 264:
Configuring Unicast RPF Loose Mode
- Page 265 and 266:
Unicast RPF with Routing Asymmetry
- Page 267 and 268:
Enabling Source Class and Destinati
- Page 269 and 270:
} Copyright © 2012, Juniper Networ
- Page 271 and 272:
} } } } protocols { ospf { area 0.0
- Page 273 and 274:
Enabling Packet Counting for Layer
- Page 275 and 276:
Understanding Targeted Broadcast Co
- Page 277 and 278:
Example: Configuring Targeted Broad
- Page 279 and 280:
CHAPTER 6 Configuring Circuit and T
- Page 281 and 282:
Related Documentation This chapter
- Page 283 and 284:
The encapsulation type can be one o
- Page 285 and 286:
The cross-connect is bidirectional,
- Page 287 and 288:
Enabling ATM-to-Ethernet Interworki
- Page 289 and 290:
Configuring the Protocol Family Con
- Page 291 and 292:
} Example: Configuring a TCC Config
- Page 293 and 294:
} } On Router B [edit interfaces] a
- Page 295 and 296:
mpls { interface all; } connections
- Page 297 and 298:
CHAPTER 7 Tracing Interface Operati
- Page 299 and 300:
PART 3 Configuring Special Router I
- Page 301 and 302:
CHAPTER 8 Configuring Discard Inter
- Page 303 and 304:
CHAPTER 9 Configuring Demultiplexin
- Page 305 and 306:
Related Documentation • IP demux
- Page 307 and 308:
Configuring a VLAN Demux Underlying
- Page 309 and 310:
Related Documentation You can inclu
- Page 311 and 312:
Copyright © 2012, Juniper Networks
- Page 313 and 314:
CHAPTER 10 Configuring the Loopback
- Page 315 and 316:
Copyright © 2012, Juniper Networks
- Page 317 and 318:
PART 4 Configuring Serial Interface
- Page 319 and 320:
CHAPTER 11 Configuring Serial Inter
- Page 321 and 322:
Configuring the Serial Line Protoco
- Page 323 and 324:
dtr normal; rts normal; } clock-rat
- Page 325 and 326:
Configuring the Serial Clocking Mod
- Page 327 and 328:
Although the serial interface is in
- Page 329 and 330:
Assertion is when the positive side
- Page 331 and 332:
By default, all signal polarities a
- Page 333 and 334:
serial-options { loopback local; }
- Page 335 and 336:
PART 5 Interfaces Fundamentals Conf
- Page 337 and 338:
CHAPTER 12 Summary of Interfaces Fu
- Page 339 and 340:
Related Documentation accept-source
- Page 341 and 342:
Related Documentation Copyright ©
- Page 343 and 344:
accounting Syntax accounting { dest
- Page 345 and 346:
acknowledge-retries Syntax acknowle
- Page 347 and 348:
action action (OAM) See the followi
- Page 349 and 350:
action-profile (Defining for CFM) S
- Page 351 and 352:
action-red-differential-delay Synta
- Page 353 and 354:
address Syntax address address { ar
- Page 355 and 356:
advertise-interval Syntax advertise
- Page 357 and 358:
Required Privilege Level Related Do
- Page 359 and 360:
aggregate (Hierarchical Policer) Sy
- Page 361 and 362:
aggregated-ether-options Syntax agg
- Page 363 and 364:
alarm Syntax alarm low-light-alarm
- Page 365 and 366:
annex Syntax annex (annex-a | annex
- Page 367 and 368:
arp Syntax arp ip-address (mac | mu
- Page 369 and 370:
atm-options Syntax atm-options { ce
- Page 371 and 372:
authentication Syntax authenticatio
- Page 373 and 374:
authenticator Syntax authenticator
- Page 375 and 376:
Required Privilege Level Related Do
- Page 377 and 378:
Required Privilege Options remote-f
- Page 379 and 380:
ackup-options Syntax backup-options
- Page 381 and 382:
andwidth-limit See the following se
- Page 383 and 384:
earer-bandwidth-limit Syntax bearer
- Page 385 and 386:
Required Privilege Level Related Do
- Page 387 and 388:
Copyright © 2012, Juniper Networks
- Page 389 and 390:
idge-domain • Configuring T1 BERT
- Page 391 and 392:
uildout See the following sections:
- Page 393 and 394:
undle Syntax bundle (ml-fpc/pic/por
- Page 395 and 396:
yte-encoding Syntax byte-encoding (
- Page 397 and 398:
calculation-weight Syntax calculati
- Page 399 and 400:
callback-wait-period Syntax callbac
- Page 401 and 402:
calling-number Syntax calling-numbe
- Page 403 and 404:
cell-bundle-size Syntax cell-bundle
- Page 405 and 406:
chap-secret Syntax chap-secret chap
- Page 407 and 408:
clear-dont-fragment-bit Syntax clea
- Page 409 and 410:
clocking Syntax clocking (external
- Page 411 and 412:
compatibility-mode Syntax compatibi
- Page 413 and 414:
compression (Voice Services) Syntax
- Page 415 and 416:
connectivity-fault-management Synta
- Page 417 and 418:
container-devices Syntax container-
- Page 419 and 420:
continuity-check Syntax continuity-
- Page 421 and 422:
control-signal Syntax control-signa
- Page 423 and 424:
crc-minor-alarm-threshold cts Synta
- Page 425 and 426:
cycle-time Syntax cycle-time cycle-
- Page 427 and 428:
data-input Syntax data-input (syste
- Page 429 and 430:
dcd Syntax dcd (ignore | normal | r
- Page 431 and 432:
deactivation-delay Syntax deactivat
- Page 433 and 434:
delay (PPPoE Service Name Tables) S
- Page 435 and 436:
delay-variation Syntax delay-variat
- Page 437 and 438:
demux-destination See the following
- Page 439 and 440:
demux-source See the following sect
- Page 441 and 442:
demux0 (Static Interface) Syntax de
- Page 443 and 444:
destination destination (IPCP) See
- Page 445 and 446:
destination-class-usage Syntax dest
- Page 447 and 448:
dial-string Syntax dial-string [ di
- Page 449 and 450:
dialin Syntax dialin (console | rou
- Page 451 and 452:
disable (Interface) Syntax disable;
- Page 453 and 454:
dlci Syntax dlci dlci-identifier; H
- Page 455 and 456:
domain-name Syntax domain-name doma
- Page 457 and 458:
down-count Syntax down-count cells;
- Page 459 and 460:
ds0-options Syntax ds0-options { be
- Page 461 and 462:
dte-options Syntax dte-options { co
- Page 463 and 464:
dtr-circuit Syntax dtr-circuit (bal
- Page 465 and 466:
dynamic-call-admission-control Synt
- Page 467 and 468:
dynamic-profile (Stacked VLAN) Synt
- Page 469 and 470:
e3-options Syntax e3-options { atm-
- Page 471 and 472:
encapsulation See the following sec
- Page 473 and 474:
Copyright © 2012, Juniper Networks
- Page 475 and 476:
Related Documentation Copyright ©
- Page 477 and 478:
Copyright © 2012, Juniper Networks
- Page 479 and 480:
Required Privilege encoding Level R
- Page 481 and 482:
epd-threshold (Physical Interface)
- Page 483 and 484:
Copyright © 2012, Juniper Networks
- Page 485 and 486:
ethernet-policer-profile Syntax eth
- Page 487 and 488:
ethernet-switch-profile Syntax ethe
- Page 489 and 490:
evcs Syntax evcs evc-id { evc-proto
- Page 491 and 492:
fast-aps-switch Syntax fast-aps-swi
- Page 493 and 494:
failover-delay Syntax failover-dela
- Page 495 and 496:
Copyright © 2012, Juniper Networks
- Page 497 and 498:
Required Privilege Options family
- Page 499 and 500:
fcs Syntax fcs (16 | 32); Hierarchy
- Page 501 and 502:
filter Syntax filter { group filter
- Page 503 and 504:
flow-control Syntax (flow-control |
- Page 505 and 506:
forward-and-send-to-re Syntax forwa
- Page 507 and 508:
forwarding-class (Gigabit Ethernet
- Page 509 and 510:
frame-error Syntax frame-error coun
- Page 511 and 512:
frame-period-summary Syntax frame-p
- Page 513 and 514:
framing (E1, E3, and T1 Interfaces)
- Page 515 and 516:
gigether-options Syntax gigether-op
- Page 517 and 518:
guard-interval Syntax guard-interva
- Page 519 and 520:
hierarchical-policer Syntax hierarc
- Page 521 and 522:
high-plp-threshold Syntax high-plp-
- Page 523 and 524:
hold-time hold-time (APS) See the f
- Page 525 and 526:
hold-time (SONET/SDH Defect Trigger
- Page 527 and 528:
idle-cycle-flag Syntax idle-cycle-f
- Page 529 and 530:
if-exceeding Syntax if-exceeding {
- Page 531 and 532:
ignore Required Privilege Options T
- Page 533 and 534:
ima-group-options Syntax ima-group-
- Page 535 and 536:
inactivity-timeout Syntax inactivit
- Page 537 and 538:
indication Syntax indication (ignor
- Page 539 and 540:
init-command-string Syntax init-com
- Page 541 and 542:
inner-tag-protocol-id Syntax inner-
- Page 543 and 544:
inner-vlan-id-range Syntax inner-vl
- Page 545 and 546:
input-priority-map Syntax input-pri
- Page 547 and 548:
input-vlan-map (Gigabit Ethernet IQ
- Page 549 and 550:
interface (IEEE 802.1x) Syntax inte
- Page 551 and 552:
interface (OAM Link-Fault Managemen
- Page 553 and 554:
interface-mode Syntax interface-mod
- Page 555 and 556:
interface-range Syntax interface-ra
- Page 557 and 558:
interface-set See the following sec
- Page 559 and 560:
interface-switch Syntax interface-s
- Page 561 and 562:
Required Privilege interfaces Level
- Page 563 and 564:
inverse-arp Syntax inverse-arp; Hie
- Page 565 and 566:
ipsec-sa Syntax ipsec-sa sa-name; H
- Page 567 and 568:
iteration-count Syntax iteration-co
- Page 569 and 570:
keepalives Syntax keepalives ; Hi
- Page 571 and 572:
lacp lacp (802.3ad) See the followi
- Page 573 and 574:
layer2-policer Syntax layer2-police
- Page 575 and 576:
level Syntax level number; Hierarch
- Page 577 and 578:
line-protocol Syntax line-protocol
- Page 579 and 580:
linear-red-profiles Syntax linear-r
- Page 581 and 582:
link-event-rate Syntax link-event-r
- Page 583 and 584:
Related Documentation link-layer-ov
- Page 585 and 586:
link-protection Syntax link-protect
- Page 587 and 588:
link-speed (Aggregated SONET/SDH) S
- Page 589 and 590:
lmi Copyright © 2012, Juniper Netw
- Page 591 and 592:
Required Privilege Level Related Do
- Page 593 and 594:
lmi-type Syntax lmi-type (ansi | it
- Page 595 and 596:
load-threshold Syntax load-threshol
- Page 597 and 598:
local-password Syntax local-passwor
- Page 599 and 600:
logical-interface-policer Syntax lo
- Page 601 and 602:
loop-timing Syntax (loop-timing | n
- Page 603 and 604:
loopback (ADSL, DS0, E1/E3, SONET/S
- Page 605 and 606:
loopback (Serial) Syntax loopback m
- Page 607 and 608:
loss-threshold Syntax loss-threshol
- Page 609 and 610:
lowest-priority-defect Syntax lowes
- Page 611 and 612:
mac-address See the following secti
- Page 613 and 614:
mac-validate Syntax mac-validate (l
- Page 615 and 616:
maintenance-domain Syntax maintenan
- Page 617 and 618:
maximum-contexts Syntax maximum-con
- Page 619 and 620:
mc-ae Syntax mc-ae { chassis-id cha
- Page 621 and 622:
member-interface-type Syntax member
- Page 623 and 624:
minimum-links Syntax minimum-links
- Page 625 and 626:
mlfr-uni-nni-bundle-options Syntax
- Page 627 and 628:
monitor-session Syntax monitor-sess
- Page 629 and 630:
mtu Syntax mtu bytes; Hierarchy Lev
- Page 631 and 632:
multicast-dlci Syntax multicast-dlc
- Page 633 and 634:
multicast-vci Syntax multicast-vci
- Page 635 and 636:
multipoint-destination Syntax multi
- Page 637 and 638:
n391 Syntax n391 number; Hierarchy
- Page 639 and 640:
n393 Syntax n393 number; Hierarchy
- Page 641 and 642:
native-vlan-id Syntax native-vlan-i
- Page 643 and 644:
negotiate-address Syntax negotiate-
- Page 645 and 646:
no-auto-mdix Syntax no-auto-mdix; H
- Page 647 and 648:
no-partition Syntax no-partition in
- Page 649 and 650:
no-termination-request Syntax no-te
- Page 651 and 652:
oam Syntax oam { ethernet { connect
- Page 653 and 654:
Description For Ethernet interfaces
- Page 655 and 656:
oam-period Syntax oam-period (disab
- Page 657 and 658:
operating-mode Syntax operating-mod
- Page 659 and 660:
option-82 Syntax option-82 ; Hiera
- Page 661 and 662:
Copyright © 2012, Juniper Networks
- Page 663 and 664:
output-list Syntax output-list [ fi
- Page 665 and 666:
output-vlan-map See the following s
- Page 667 and 668:
overflow overflow (Receive Bucket)
- Page 669 and 670:
paired-group Syntax paired-group gr
- Page 671 and 672:
pap-password Syntax pap-password pa
- Page 673 and 674:
passive passive (CHAP) Syntax passi
- Page 675 and 676:
passive-monitor-mode Syntax passive
- Page 677 and 678:
path-trace Syntax path-trace trace-
- Page 679 and 680:
payload-size Syntax payload-size by
- Page 681 and 682:
peer Syntax peer a.b.c.d { interfac
- Page 683 and 684:
per-unit-scheduler Syntax per-unit-
- Page 685 and 686:
periodic pfc Syntax periodic interv
- Page 687 and 688:
plp1 Syntax plp1 cells; Hierarchy L
- Page 689 and 690:
policer policer (CFM Firewall) See
- Page 691 and 692:
policer (CFM Session) Syntax police
- Page 693 and 694:
policer (Interface) Syntax policer
- Page 695 and 696:
pool Syntax pool pool-name ; Hierar
- Page 697 and 698:
pop-all-labels Syntax pop-all-label
- Page 699 and 700:
port Syntax port { minimum port-num
- Page 701 and 702:
ppp-options Syntax ppp-options { ch
- Page 703 and 704:
pppoe-underlying-options (Static an
- Page 705 and 706:
preferred-source-address Syntax pre
- Page 707 and 708:
premium (Output Priority Map) Synta
- Page 709 and 710:
primary primary (Address on Interfa
- Page 711 and 712:
priority See the following sections
- Page 713 and 714:
promiscuous-mode Syntax promiscuous
- Page 715 and 716:
estore-interval number; traceoption
- Page 717 and 718:
proxy-arp Syntax proxy-arp (restric
- Page 719 and 720:
queue-depth Syntax queue-depth cell
- Page 721 and 722:
quiet-period Syntax quiet-period se
- Page 723 and 724:
anges (Dynamic VLAN) Syntax ranges
- Page 725 and 726:
eauthentication Syntax reauthentica
- Page 727 and 728:
eceive-ttl-exceeded Syntax receive-
- Page 729 and 730:
edundancy-options Syntax redundancy
- Page 731 and 732:
emote-loopback-respond Syntax remot
- Page 733 and 734:
equest Syntax request (protect | wo
- Page 735 and 736:
estore-interval Syntax restore-inte
- Page 737 and 738:
evertive Syntax revertive; Hierarch
- Page 739 and 740:
outing-instance Syntax routing-inst
- Page 741 and 742:
pf-check (interfaces) Syntax rpf-ch
- Page 743 and 744:
ts Syntax rts (assert | de-assert |
- Page 745 and 746:
• vbr on page 804 sa-multicast (1
- Page 747 and 748:
scheduler-maps Syntax scheduler-map
- Page 749 and 750:
serial-options Syntax serial-option
- Page 751 and 752:
service service (Logical Interfaces
- Page 753 and 754:
Related Documentation service-domai
- Page 755 and 756:
service-name-table Syntax service-n
- Page 757 and 758:
service-set Syntax service-set serv
- Page 759 and 760:
services-options Syntax services-op
- Page 761 and 762:
shaping Syntax shaping { (cbr rate
- Page 763 and 764:
short-name-format Syntax short-name
- Page 765 and 766:
sla-iterator-profile Syntax sla-ite
- Page 767 and 768:
snext Syntax snext margin; Hierarch
- Page 769 and 770:
sonet-options Syntax sonet-options
- Page 771 and 772:
source Syntax source source-address
- Page 773 and 774:
source-class-usage Syntax source-cl
- Page 775 and 776:
speed speed (Ethernet) See the foll
- Page 777 and 778:
speed (SONET/SDH) Syntax speed (oc3
- Page 779 and 780:
stacked-vlan-ranges Syntax stacked-
- Page 781 and 782:
start-end-flag Syntax start-end-fla
- Page 783 and 784:
static-tei-val Syntax static-tei-va
- Page 785 and 786:
swap-push Syntax swap-push; Hierarc
- Page 787 and 788:
switch-port Syntax switch-port port
- Page 789 and 790:
switching-mode Syntax switching-mod
- Page 791 and 792:
syslog syslog (Interfaces) See the
- Page 793 and 794:
system-priority Syntax system-prior
- Page 795 and 796:
t310 Syntax t310-value seconds; Hie
- Page 797 and 798:
t3-options Syntax t3-options { atm-
- Page 799 and 800:
tag-protocol-id (TPID to Rewrite) S
- Page 801 and 802:
tei-option Syntax tei-option (first
- Page 803 and 804:
timeslots Syntax timeslots time-slo
- Page 805 and 806:
traceoptions Copyright © 2012, Jun
- Page 807 and 808:
traceoptions (Individual Interfaces
- Page 809 and 810:
traceoptions (Interface Process) Sy
- Page 811 and 812:
traceoptions (LACP) Syntax traceopt
- Page 813 and 814:
traceoptions (PPP Process) Syntax t
- Page 815 and 816:
Related Documentation Copyright ©
- Page 817 and 818:
Required Privilege Level Related Do
- Page 819 and 820:
translate-plp-control-word-de Synta
- Page 821 and 822:
transmit-weight See the following s
- Page 823 and 824:
trigger Syntax trigger { defect ign
- Page 825 and 826:
trunk-id ttl Syntax trunk-id number
- Page 827 and 828:
underlying-interface Syntax underly
- Page 829 and 830:
unit Syntax unit logical-unit-numbe
- Page 831 and 832:
Copyright © 2012, Juniper Networks
- Page 833 and 834:
Copyright © 2012, Juniper Networks
- Page 835 and 836:
Related Documentation • Configuri
- Page 837 and 838:
unnumbered-address (Ethernet) Synta
- Page 839 and 840:
up-count Syntax up-count cells; Hie
- Page 841 and 842:
username-include Syntax username-in
- Page 843 and 844:
vc-cos-mode • rtvbr on page 706
- Page 845 and 846:
vci-range Syntax vci-range start st
- Page 847 and 848:
vlan-id (Outer VLAN ID) Syntax vlan
- Page 849 and 850:
vlan-id-list Copyright © 2012, Jun
- Page 851 and 852:
Required Privilege Level Related Do
- Page 853 and 854:
vlan-ranges Syntax vlan-ranges { ac
- Page 855 and 856:
vlan-steering (100-Gigabit Ethernet
- Page 857 and 858:
vlan-tags Copyright © 2012, Junipe
- Page 859 and 860:
Required Privilege Level Related Do
- Page 861 and 862:
Required Privilege Level Related Do
- Page 863 and 864:
vpi See the following sections: •
- Page 865 and 866:
vpi (Logical Interface and Interwor
- Page 867 and 868:
wavelength Syntax wavelength nm; Hi
- Page 869 and 870:
Copyright © 2012, Juniper Networks
- Page 871 and 872:
working-circuit Syntax working-circ
- Page 873 and 874:
PART 6 Index Copyright © 2012, Jun
- Page 875 and 876:
Index Symbols #, comments in config
- Page 877 and 878:
urst-size-limit statement hierarchi
- Page 879 and 880:
disable statement..................
- Page 881 and 882:
family descriptors.................
- Page 883 and 884:
interfaces.........................
- Page 885 and 886:
logical-interface-fpc-redundancy st
- Page 887 and 888:
O OAM cells See keepalives oam stat
- Page 889 and 890:
primary statement..................
- Page 891 and 892:
stacked-vlan-tagging statement.....
- Page 893 and 894:
V vbr statement....................
- Page 895 and 896:
Index of Statements and Commands Sy
- Page 897 and 898:
down-count statement...............
- Page 899 and 900:
long-buildout statement............
- Page 901 and 902:
priority schedulers................
- Page 903 and 904:
username-include statement stacked