Junos OS Interfaces Fundamentals ... - Juniper Networks

More documents

Recommendations

Info

Junos ® OS 12.1 Interfaces Fundamentals Configuration Guide 2 Copyright © 2012, Juniper Networks, Inc.
CHAPTER 1 Interfaces Fundamentals Configuration Statements and Hierarchy [edit chassis] Hierarchy Level Copyright © 2012, Juniper Networks, Inc. The following interfaces hierarchy listings show the complete configuration statement hierarchy for the indicated hierarchy levels, listing all possible configuration statements within the indicated hierarchy levels, and showing their level in the configuration hierarchy. When you are configuring the Junos OS, your current hierarchy level is shown in the banner on the line preceding the user@host# prompt. This section contains the following topics: • [edit chassis] Hierarchy Level on page 3 • [edit interfaces] Hierarchy Level on page 4 • [edit logical-systems] Hierarchy Level on page 20 chassis { aggregated-devices { ethernet { device-count number; } sonet { device-count number; } } channel-group number { ethernet { device-count number; } fpc slot-number{ pic pic-number { adaptive-services{ service-package (layer-2 | layer-3); } aggregate-ports; atm-cell-relay-accumulation; atm-l2circuit-mode (aal5 | cell | trunk trunk); ce1 { e1 link-number { 3
Page 1 and 2: Junos ® OS Interfaces Fundamentals
Page 3 and 4: Abbreviated Table of Contents About
Page 5 and 6: Table of Contents About This Guide
Page 7 and 8: Tracing Operations of the pppd Proc
Page 9 and 10: Applying Policers . . . . . . . . .
Page 11 and 12: Part 4 Configuring Serial Interface
Page 13 and 14: Copyright © 2012, Juniper Networks
Page 25 and 26: Part 6 Index Copyright © 2012, Jun
Page 27 and 28: List of Figures Part 2 Router Inter
Page 29 and 30: List of Tables About This Guide . .
Page 31 and 32: About This Guide This preface provi
Page 33 and 34: Using the Indexes • MX Series •
Page 35 and 36: Table 1: Notice Icons Icon Meaning
Page 37 and 38: or are covered under warranty, and
Page 39: PART 1 Interfaces Fundamentals Conf
Page 63 and 64: PART 2 Router Interfaces Configurat
Page 65 and 66: CHAPTER 2 Understanding Router Inte
Page 67 and 68: • Understanding Services Interfac
Page 69 and 70: Related Documentation For informati
Page 71 and 72: Table 3: Supported Routing Engines
Page 73 and 74: Related Documentation Table 3: Supp
Page 77 and 78: Displaying Internal Ethernet Interf
Page 79 and 80: Understanding Transient Interfaces
Page 81 and 82: Related Documentation Container Int
Page 83 and 84: Interface Encapsulations Overview T
Page 85 and 86: Table 4: Encapsulation Support by I
Page 91 and 92:
Table 4: Encapsulation Support by I
Page 93 and 94:
Table 4: Encapsulation Support by I
Page 95 and 96:
Related Documentation You configure
Page 97 and 98:
• coc12—Channelized OC12 IQ int
Page 99 and 100:
• pd—Interface on the rendezvou
Page 101 and 102:
interface. A nonconcatenated (that
Page 103 and 104:
Table 5: FPC Numbering for T640 Rou
Page 105 and 106:
Copyright © 2012, Juniper Networks
Page 107 and 108:
Page 109 and 110:
CHAPTER 3 Configuring Physical Inte
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Related Documentation • t3-option
Page 121 and 122:
Table 9: Statements for Physical In
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Example: Specifying an Interface Ra
Page 139 and 140:
Page 141 and 142:
. ge-1/MAX_PICS/0 ... ge-1/max_pics
Page 143 and 144:
## '256' was expanded from interfac
Page 145 and 146:
The interface node present under au
Page 147 and 148:
When the Services Router applies th
Page 149 and 150:
The description can be a single lin
Page 151 and 152:
sizes by interface type, and Table
Page 153 and 154:
Table 12: Media MTU Sizes by Interf
Page 155 and 156:
Table 15: Media MTU Sizes by Interf
Page 157 and 158:
Page 159 and 160:
Table 21: Encapsulation Overhead by
Page 161 and 162:
Because tunnel services interfaces
Page 163 and 164:
• CCC version (extended-vlan-ccc)
Page 165 and 166:
Encapsulation Capabilities • Circ
Page 167 and 168:
To configure a CHAP access profile,
Page 169 and 170:
ppp-options { chap { access-profile
Page 171 and 172:
On each physical interface with PPP
Page 173 and 174:
Monitoring a PPP Session local-name
Page 175 and 176:
Page 177 and 178:
Configuring the Interface Speed CHA
Page 179 and 180:
NOTE: Half-duplex mode is not suppo
Page 181 and 182:
Configuring Keepalives By default,
Page 183 and 184:
Related Documentation serial PICs (
Page 185 and 186:
threshold bytes; } In the rate stat
Page 187 and 188:
of a line break or a signal corrupt
Page 189 and 190:
Interface Diagnostics Copyright ©
Page 191 and 192:
NOTE: BERT is supported on the PDH
Page 193 and 194:
} } Tracing Operations of an Indivi
Page 195 and 196:
Enabling Unidirectional Traffic Flo
Page 197 and 198:
Page 199 and 200:
CHAPTER 4 Configuring Logical Inter
Page 201 and 202:
Page 203 and 204:
vci vpi-identifier.vci-identifier;
Page 205 and 206:
Table 26: Statements for Logical In
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
logical unit number must be 0. Fram
Page 213 and 214:
Configuring a Point-to-Point Connec
Page 215 and 216:
Configuring the Interface Bandwidth
Page 217 and 218:
• A logical interface cannot have
Page 219 and 220:
Configuring the PPP Clear Loop Dete
Page 221 and 222:
Configuring a Default PAP Password
Page 223 and 224:
You can include this statement at t
Page 225 and 226:
CHAPTER 5 Configuring Protocol Fami
Page 227 and 228:
Page 229 and 230:
IPv6 Overview Copyright © 2012, Ju
Page 231 and 232:
Page 233 and 234:
Related Documentation • interface
Page 235 and 236:
Related Documentation • so-1/1/0
Page 237 and 238:
NOTE: The option to negotiate an IP
Page 239 and 240:
NOTE: For interfaces with PPP encap
Page 241 and 242:
You can include this statement at t
Page 243 and 244:
Example: Configuring the Preferred
Page 245 and 246:
Disabling the Removal of Address an
Page 247 and 248:
interface, lo0. By default, the pri
Page 249 and 250:
Page 251 and 252:
Applying Hierarchical Policers on E
Page 253 and 254:
CoS Configuration of Forwarding Cla
Page 255 and 256:
Configuring a Color-Blind trTCM You
Page 257 and 258:
} Copyright © 2012, Juniper Networ
Page 259 and 260:
When an FBF filter is installed as
Page 261 and 262:
Configuring Unicast RPF Copyright
Page 263 and 264:
Configuring Unicast RPF Loose Mode
Page 265 and 266:
Unicast RPF with Routing Asymmetry
Page 267 and 268:
Enabling Source Class and Destinati
Page 269 and 270:
} Copyright © 2012, Juniper Networ
Page 271 and 272:
} } } } protocols { ospf { area 0.0
Page 273 and 274:
Enabling Packet Counting for Layer
Page 275 and 276:
Understanding Targeted Broadcast Co
Page 277 and 278:
Example: Configuring Targeted Broad
Page 279 and 280:
CHAPTER 6 Configuring Circuit and T
Page 281 and 282:
Related Documentation This chapter
Page 283 and 284:
The encapsulation type can be one o
Page 285 and 286:
The cross-connect is bidirectional,
Page 287 and 288:
Enabling ATM-to-Ethernet Interworki
Page 289 and 290:
Configuring the Protocol Family Con
Page 291 and 292:
} Example: Configuring a TCC Config
Page 293 and 294:
} } On Router B [edit interfaces] a
Page 295 and 296:
mpls { interface all; } connections
Page 297 and 298:
CHAPTER 7 Tracing Interface Operati
Page 299 and 300:
PART 3 Configuring Special Router I
Page 301 and 302:
CHAPTER 8 Configuring Discard Inter
Page 303 and 304:
CHAPTER 9 Configuring Demultiplexin
Page 305 and 306:
Related Documentation • IP demux
Page 307 and 308:
Configuring a VLAN Demux Underlying
Page 309 and 310:
Related Documentation You can inclu
Page 311 and 312:
Page 313 and 314:
CHAPTER 10 Configuring the Loopback
Page 315 and 316:
Page 317 and 318:
PART 4 Configuring Serial Interface
Page 319 and 320:
CHAPTER 11 Configuring Serial Inter
Page 321 and 322:
Configuring the Serial Line Protoco
Page 323 and 324:
dtr normal; rts normal; } clock-rat
Page 325 and 326:
Configuring the Serial Clocking Mod
Page 327 and 328:
Although the serial interface is in
Page 329 and 330:
Assertion is when the positive side
Page 331 and 332:
By default, all signal polarities a
Page 333 and 334:
serial-options { loopback local; }
Page 335 and 336:
PART 5 Interfaces Fundamentals Conf
Page 337 and 338:
CHAPTER 12 Summary of Interfaces Fu
Page 339 and 340:
Related Documentation accept-source
Page 341 and 342:
Related Documentation Copyright ©
Page 343 and 344:
accounting Syntax accounting { dest
Page 345 and 346:
acknowledge-retries Syntax acknowle
Page 347 and 348:
action action (OAM) See the followi
Page 349 and 350:
action-profile (Defining for CFM) S
Page 351 and 352:
action-red-differential-delay Synta
Page 353 and 354:
address Syntax address address { ar
Page 355 and 356:
advertise-interval Syntax advertise
Page 357 and 358:
Required Privilege Level Related Do
Page 359 and 360:
aggregate (Hierarchical Policer) Sy
Page 361 and 362:
aggregated-ether-options Syntax agg
Page 363 and 364:
alarm Syntax alarm low-light-alarm
Page 365 and 366:
annex Syntax annex (annex-a | annex
Page 367 and 368:
arp Syntax arp ip-address (mac | mu
Page 369 and 370:
atm-options Syntax atm-options { ce
Page 371 and 372:
authentication Syntax authenticatio
Page 373 and 374:
authenticator Syntax authenticator
Page 375 and 376:
Page 377 and 378:
Required Privilege Options remote-f
Page 379 and 380:
ackup-options Syntax backup-options
Page 381 and 382:
andwidth-limit See the following se
Page 383 and 384:
earer-bandwidth-limit Syntax bearer
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
idge-domain • Configuring T1 BERT
Page 391 and 392:
uildout See the following sections:
Page 393 and 394:
undle Syntax bundle (ml-fpc/pic/por
Page 395 and 396:
yte-encoding Syntax byte-encoding (
Page 397 and 398:
calculation-weight Syntax calculati
Page 399 and 400:
callback-wait-period Syntax callbac
Page 401 and 402:
calling-number Syntax calling-numbe
Page 403 and 404:
cell-bundle-size Syntax cell-bundle
Page 405 and 406:
chap-secret Syntax chap-secret chap
Page 407 and 408:
clear-dont-fragment-bit Syntax clea
Page 409 and 410:
clocking Syntax clocking (external
Page 411 and 412:
compatibility-mode Syntax compatibi
Page 413 and 414:
compression (Voice Services) Syntax
Page 415 and 416:
connectivity-fault-management Synta
Page 417 and 418:
container-devices Syntax container-
Page 419 and 420:
continuity-check Syntax continuity-
Page 421 and 422:
control-signal Syntax control-signa
Page 423 and 424:
crc-minor-alarm-threshold cts Synta
Page 425 and 426:
cycle-time Syntax cycle-time cycle-
Page 427 and 428:
data-input Syntax data-input (syste
Page 429 and 430:
dcd Syntax dcd (ignore | normal | r
Page 431 and 432:
deactivation-delay Syntax deactivat
Page 433 and 434:
delay (PPPoE Service Name Tables) S
Page 435 and 436:
delay-variation Syntax delay-variat
Page 437 and 438:
demux-destination See the following
Page 439 and 440:
demux-source See the following sect
Page 441 and 442:
demux0 (Static Interface) Syntax de
Page 443 and 444:
destination destination (IPCP) See
Page 445 and 446:
destination-class-usage Syntax dest
Page 447 and 448:
dial-string Syntax dial-string [ di
Page 449 and 450:
dialin Syntax dialin (console | rou
Page 451 and 452:
disable (Interface) Syntax disable;
Page 453 and 454:
dlci Syntax dlci dlci-identifier; H
Page 455 and 456:
domain-name Syntax domain-name doma
Page 457 and 458:
down-count Syntax down-count cells;
Page 459 and 460:
ds0-options Syntax ds0-options { be
Page 461 and 462:
dte-options Syntax dte-options { co
Page 463 and 464:
dtr-circuit Syntax dtr-circuit (bal
Page 465 and 466:
dynamic-call-admission-control Synt
Page 467 and 468:
dynamic-profile (Stacked VLAN) Synt
Page 469 and 470:
e3-options Syntax e3-options { atm-
Page 471 and 472:
encapsulation See the following sec
Page 473 and 474:
Page 475 and 476:
Page 477 and 478:
Page 479 and 480:
Required Privilege encoding Level R
Page 481 and 482:
epd-threshold (Physical Interface)
Page 483 and 484:
Page 485 and 486:
ethernet-policer-profile Syntax eth
Page 487 and 488:
ethernet-switch-profile Syntax ethe
Page 489 and 490:
evcs Syntax evcs evc-id { evc-proto
Page 491 and 492:
fast-aps-switch Syntax fast-aps-swi
Page 493 and 494:
failover-delay Syntax failover-dela
Page 495 and 496:
Page 497 and 498:
Required Privilege Options family
Page 499 and 500:
fcs Syntax fcs (16 | 32); Hierarchy
Page 501 and 502:
filter Syntax filter { group filter
Page 503 and 504:
flow-control Syntax (flow-control |
Page 505 and 506:
forward-and-send-to-re Syntax forwa
Page 507 and 508:
forwarding-class (Gigabit Ethernet
Page 509 and 510:
frame-error Syntax frame-error coun
Page 511 and 512:
frame-period-summary Syntax frame-p
Page 513 and 514:
framing (E1, E3, and T1 Interfaces)
Page 515 and 516:
gigether-options Syntax gigether-op
Page 517 and 518:
guard-interval Syntax guard-interva
Page 519 and 520:
hierarchical-policer Syntax hierarc
Page 521 and 522:
high-plp-threshold Syntax high-plp-
Page 523 and 524:
hold-time hold-time (APS) See the f
Page 525 and 526:
hold-time (SONET/SDH Defect Trigger
Page 527 and 528:
idle-cycle-flag Syntax idle-cycle-f
Page 529 and 530:
if-exceeding Syntax if-exceeding {
Page 531 and 532:
ignore Required Privilege Options T
Page 533 and 534:
ima-group-options Syntax ima-group-
Page 535 and 536:
inactivity-timeout Syntax inactivit
Page 537 and 538:
indication Syntax indication (ignor
Page 539 and 540:
init-command-string Syntax init-com
Page 541 and 542:
inner-tag-protocol-id Syntax inner-
Page 543 and 544:
inner-vlan-id-range Syntax inner-vl
Page 545 and 546:
input-priority-map Syntax input-pri
Page 547 and 548:
input-vlan-map (Gigabit Ethernet IQ
Page 549 and 550:
interface (IEEE 802.1x) Syntax inte
Page 551 and 552:
interface (OAM Link-Fault Managemen
Page 553 and 554:
interface-mode Syntax interface-mod
Page 555 and 556:
interface-range Syntax interface-ra
Page 557 and 558:
interface-set See the following sec
Page 559 and 560:
interface-switch Syntax interface-s
Page 561 and 562:
Required Privilege interfaces Level
Page 563 and 564:
inverse-arp Syntax inverse-arp; Hie
Page 565 and 566:
ipsec-sa Syntax ipsec-sa sa-name; H
Page 567 and 568:
iteration-count Syntax iteration-co
Page 569 and 570:
keepalives Syntax keepalives ; Hi
Page 571 and 572:
lacp lacp (802.3ad) See the followi
Page 573 and 574:
layer2-policer Syntax layer2-police
Page 575 and 576:
level Syntax level number; Hierarch
Page 577 and 578:
line-protocol Syntax line-protocol
Page 579 and 580:
linear-red-profiles Syntax linear-r
Page 581 and 582:
link-event-rate Syntax link-event-r
Page 583 and 584:
Related Documentation link-layer-ov
Page 585 and 586:
link-protection Syntax link-protect
Page 587 and 588:
link-speed (Aggregated SONET/SDH) S
Page 589 and 590:
lmi Copyright © 2012, Juniper Netw
Page 591 and 592:
Page 593 and 594:
lmi-type Syntax lmi-type (ansi | it
Page 595 and 596:
load-threshold Syntax load-threshol
Page 597 and 598:
local-password Syntax local-passwor
Page 599 and 600:
logical-interface-policer Syntax lo
Page 601 and 602:
loop-timing Syntax (loop-timing | n
Page 603 and 604:
loopback (ADSL, DS0, E1/E3, SONET/S
Page 605 and 606:
loopback (Serial) Syntax loopback m
Page 607 and 608:
loss-threshold Syntax loss-threshol
Page 609 and 610:
lowest-priority-defect Syntax lowes
Page 611 and 612:
mac-address See the following secti
Page 613 and 614:
mac-validate Syntax mac-validate (l
Page 615 and 616:
maintenance-domain Syntax maintenan
Page 617 and 618:
maximum-contexts Syntax maximum-con
Page 619 and 620:
mc-ae Syntax mc-ae { chassis-id cha
Page 621 and 622:
member-interface-type Syntax member
Page 623 and 624:
minimum-links Syntax minimum-links
Page 625 and 626:
mlfr-uni-nni-bundle-options Syntax
Page 627 and 628:
monitor-session Syntax monitor-sess
Page 629 and 630:
mtu Syntax mtu bytes; Hierarchy Lev
Page 631 and 632:
multicast-dlci Syntax multicast-dlc
Page 633 and 634:
multicast-vci Syntax multicast-vci
Page 635 and 636:
multipoint-destination Syntax multi
Page 637 and 638:
n391 Syntax n391 number; Hierarchy
Page 639 and 640:
n393 Syntax n393 number; Hierarchy
Page 641 and 642:
native-vlan-id Syntax native-vlan-i
Page 643 and 644:
negotiate-address Syntax negotiate-
Page 645 and 646:
no-auto-mdix Syntax no-auto-mdix; H
Page 647 and 648:
no-partition Syntax no-partition in
Page 649 and 650:
no-termination-request Syntax no-te
Page 651 and 652:
oam Syntax oam { ethernet { connect
Page 653 and 654:
Description For Ethernet interfaces
Page 655 and 656:
oam-period Syntax oam-period (disab
Page 657 and 658:
operating-mode Syntax operating-mod
Page 659 and 660:
option-82 Syntax option-82 ; Hiera
Page 661 and 662:
Page 663 and 664:
output-list Syntax output-list [ fi
Page 665 and 666:
output-vlan-map See the following s
Page 667 and 668:
overflow overflow (Receive Bucket)
Page 669 and 670:
paired-group Syntax paired-group gr
Page 671 and 672:
pap-password Syntax pap-password pa
Page 673 and 674:
passive passive (CHAP) Syntax passi
Page 675 and 676:
passive-monitor-mode Syntax passive
Page 677 and 678:
path-trace Syntax path-trace trace-
Page 679 and 680:
payload-size Syntax payload-size by
Page 681 and 682:
peer Syntax peer a.b.c.d { interfac
Page 683 and 684:
per-unit-scheduler Syntax per-unit-
Page 685 and 686:
periodic pfc Syntax periodic interv
Page 687 and 688:
plp1 Syntax plp1 cells; Hierarchy L
Page 689 and 690:
policer policer (CFM Firewall) See
Page 691 and 692:
policer (CFM Session) Syntax police
Page 693 and 694:
policer (Interface) Syntax policer
Page 695 and 696:
pool Syntax pool pool-name ; Hierar
Page 697 and 698:
pop-all-labels Syntax pop-all-label
Page 699 and 700:
port Syntax port { minimum port-num
Page 701 and 702:
ppp-options Syntax ppp-options { ch
Page 703 and 704:
pppoe-underlying-options (Static an
Page 705 and 706:
preferred-source-address Syntax pre
Page 707 and 708:
premium (Output Priority Map) Synta
Page 709 and 710:
primary primary (Address on Interfa
Page 711 and 712:
priority See the following sections
Page 713 and 714:
promiscuous-mode Syntax promiscuous
Page 715 and 716:
estore-interval number; traceoption
Page 717 and 718:
proxy-arp Syntax proxy-arp (restric
Page 719 and 720:
queue-depth Syntax queue-depth cell
Page 721 and 722:
quiet-period Syntax quiet-period se
Page 723 and 724:
anges (Dynamic VLAN) Syntax ranges
Page 725 and 726:
eauthentication Syntax reauthentica
Page 727 and 728:
eceive-ttl-exceeded Syntax receive-
Page 729 and 730:
edundancy-options Syntax redundancy
Page 731 and 732:
emote-loopback-respond Syntax remot
Page 733 and 734:
equest Syntax request (protect | wo
Page 735 and 736:
estore-interval Syntax restore-inte
Page 737 and 738:
evertive Syntax revertive; Hierarch
Page 739 and 740:
outing-instance Syntax routing-inst
Page 741 and 742:
pf-check (interfaces) Syntax rpf-ch
Page 743 and 744:
ts Syntax rts (assert | de-assert |
Page 745 and 746:
• vbr on page 804 sa-multicast (1
Page 747 and 748:
scheduler-maps Syntax scheduler-map
Page 749 and 750:
serial-options Syntax serial-option
Page 751 and 752:
service service (Logical Interfaces
Page 753 and 754:
Related Documentation service-domai
Page 755 and 756:
service-name-table Syntax service-n
Page 757 and 758:
service-set Syntax service-set serv
Page 759 and 760:
services-options Syntax services-op
Page 761 and 762:
shaping Syntax shaping { (cbr rate
Page 763 and 764:
short-name-format Syntax short-name
Page 765 and 766:
sla-iterator-profile Syntax sla-ite
Page 767 and 768:
snext Syntax snext margin; Hierarch
Page 769 and 770:
sonet-options Syntax sonet-options
Page 771 and 772:
source Syntax source source-address
Page 773 and 774:
source-class-usage Syntax source-cl
Page 775 and 776:
speed speed (Ethernet) See the foll
Page 777 and 778:
speed (SONET/SDH) Syntax speed (oc3
Page 779 and 780:
stacked-vlan-ranges Syntax stacked-
Page 781 and 782:
start-end-flag Syntax start-end-fla
Page 783 and 784:
static-tei-val Syntax static-tei-va
Page 785 and 786:
swap-push Syntax swap-push; Hierarc
Page 787 and 788:
switch-port Syntax switch-port port
Page 789 and 790:
switching-mode Syntax switching-mod
Page 791 and 792:
syslog syslog (Interfaces) See the
Page 793 and 794:
system-priority Syntax system-prior
Page 795 and 796:
t310 Syntax t310-value seconds; Hie
Page 797 and 798:
t3-options Syntax t3-options { atm-
Page 799 and 800:
tag-protocol-id (TPID to Rewrite) S
Page 801 and 802:
tei-option Syntax tei-option (first
Page 803 and 804:
timeslots Syntax timeslots time-slo
Page 805 and 806:
traceoptions Copyright © 2012, Jun
Page 807 and 808:
traceoptions (Individual Interfaces
Page 809 and 810:
traceoptions (Interface Process) Sy
Page 811 and 812:
traceoptions (LACP) Syntax traceopt
Page 813 and 814:
traceoptions (PPP Process) Syntax t
Page 815 and 816:
Page 817 and 818:
Page 819 and 820:
translate-plp-control-word-de Synta
Page 821 and 822:
transmit-weight See the following s
Page 823 and 824:
trigger Syntax trigger { defect ign
Page 825 and 826:
trunk-id ttl Syntax trunk-id number
Page 827 and 828:
underlying-interface Syntax underly
Page 829 and 830:
unit Syntax unit logical-unit-numbe
Page 831 and 832:
Page 833 and 834:
Page 835 and 836:
Related Documentation • Configuri
Page 837 and 838:
unnumbered-address (Ethernet) Synta
Page 839 and 840:
up-count Syntax up-count cells; Hie
Page 841 and 842:
username-include Syntax username-in
Page 843 and 844:
vc-cos-mode • rtvbr on page 706
Page 845 and 846:
vci-range Syntax vci-range start st
Page 847 and 848:
vlan-id (Outer VLAN ID) Syntax vlan
Page 849 and 850:
vlan-id-list Copyright © 2012, Jun
Page 851 and 852:
Page 853 and 854:
vlan-ranges Syntax vlan-ranges { ac
Page 855 and 856:
vlan-steering (100-Gigabit Ethernet
Page 857 and 858:
vlan-tags Copyright © 2012, Junipe
Page 859 and 860:
Page 861 and 862:
Page 863 and 864:
vpi See the following sections: •
Page 865 and 866:
vpi (Logical Interface and Interwor
Page 867 and 868:
wavelength Syntax wavelength nm; Hi
Page 869 and 870:
Page 871 and 872:
working-circuit Syntax working-circ
Page 873 and 874:
PART 6 Index Copyright © 2012, Jun
Page 875 and 876:
Index Symbols #, comments in config
Page 877 and 878:
urst-size-limit statement hierarchi
Page 879 and 880:
disable statement..................
Page 881 and 882:
family descriptors.................
Page 883 and 884:
interfaces.........................
Page 885 and 886:
logical-interface-fpc-redundancy st
Page 887 and 888:
O OAM cells See keepalives oam stat
Page 889 and 890:
primary statement..................
Page 891 and 892:
stacked-vlan-tagging statement.....
Page 893 and 894:
V vbr statement....................
Page 895 and 896:
Index of Statements and Commands Sy
Page 897 and 898:
down-count statement...............
Page 899 and 900:
long-buildout statement............
Page 901 and 902:
priority schedulers................
Page 903 and 904:
username-include statement stacked
show all

Junos OS Interfaces Fundamentals ... - Juniper Networks

Create successful ePaper yourself

Delete template?

Save as template?