Junos OS Interfaces Fundamentals ... - Juniper Networks

lowest-priority-defect
Syntax lowest-priority-defect (all-defects | err-xcon | mac-rem-err-xcon | no-defect | rem-err-xcon
| xcon)
Hierarchy Level [edit protocols oam ethernet connectivity-fault-management maintenance-domain
domain-name maintenance-association ma-name mep mep-id]
Release Information Statement introduced in Junos OS Release 10.0.
Description Specify the lowest priority defect that is allowed to generate a Fault Alarm whenever
Required Privilege
CFM detects a defect. This configuration is done at the MEP level.
Options Specify one of the following lowest priority defect options:
Level
Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
all-defects—Allows all defects.
err-xcon—Allows only erroneous CCM and cross-connect CCM defects.
mac-rem-err-xcon—Allows only MAC, not receiving CCM, erroneous CCM, and
cross-connect defects.
no-defect—Allows no defects.
rem-err-xcon—Allows only not receiving CCM, erroneous CCM, and cross-connect CCM
defects.
xcon—Allows only cross-connect CCM defects.
Chapter 12: Summary of Interfaces Fundamentals Configuration Statements
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Configuring the Maintenance End Point Lowest Priority Defect
571