PLAYMAKER SERIES SERVICE MANUAL - Blueprint Gaming

HARDWARE OVERVIEW
Playmaker Series ‐Twin Screen Casino cabinet manufactured by ADP (part of the Gauselmann
Group).
Key components:
� Power Supply
� Money Controls Pay Link IO Solution
� PC (ROSH compliant) with removable Compact Flash Card
� JCM EBA 34 Note Acceptor
� Merkur MD100 Note Dispenser (if fitted)
� Azkoyen Coin Mechanism
� 2 x Azkoyen Hopper U+
� 19” Touch Screen Monitor
� 19” Monitor
� Base Box Speaker
Cabinet Dimensions:
� WIDTH = 520mm
� HEIGHT = 1900mm
� DEPTH = 550mm
� WEIGHT = 180kg
� Voltage 230Vac 50Hz 460watts
� The mains fuse rating is 6.3Amp 250Volt.
ECM/PAK TESTED TO UK STANDARDS.
QUICK SET UP
� The machine must stand on a level and stable floor.
� Mains plugs and sockets should be tight fitting and in good order.
� Avoid positioning the machine near heat supplies and direct sunlight.
� Whilst the power to the machine is switched on, never disconnect any of the integrated
components as this can cause serious damage.
� On initial start up default game settings and non‐data protocol will be active. (see machine
set up for switching to Data software)
� Refer to Test and Refill instructions outlined within this manual to install machine on site
and/ or set up machine with bespoke game settings.
� IMPORTANT INFORMATION: AFTER SOFTWARE UPDATES SUPPLIED BY BLUEPRINT GAMING
Ltd. PLEASE CHECK ALL GAME SETTINGS AS THE NVR MAY HAVE BEEN RESET.
2