PLAYMAKER SERIES SERVICE MANUAL - Blueprint Gaming

More documents

Recommendations

Info

To part float: � Place the amount of coins to be floated into the hopper. � Press ‘DUMP HOPPER’ and the hopper will payout all the coins into the pay tray. � Once all coins have been dumped, the screen will display; Hopper #1 £*** ‐ SHORT BY £*** Hopper #2 £*** ‐ SHORT BY £*** (This shows the amount of coins dumped and the amount each hopper is short of the set float level) � Place the coins back in the hopper and close the door. � DO NOT PRESS THE TOP UP BUTTON. � Close the door and remove the Refill key. � The machine is now floated to the amount of coins dumped. NOTE: HOPPER #1 MUST NOT EXCEED £300 ON PART FLOAT. IF HOPPER #1 IS FULLY FLOATED, ANY ADDITIONAL COINS WILL DIVERT TO HOPPER #2 Refill Notes (Available on cabinets where a Merkur MD100 note dispenser is fitted) The MD100 note dispenser can hold a maximum of 34 notes per denomination (34 x £5 notes, £34 x £10 notes, £34 x £20 notes). Please note that the MD100 does not require a full float to function correctly and the float levels cannot be changed from the default level. To float the MD100 note dispenser: � On entering the ‘Refill Notes’ screen the green light on the note acceptor bezel will light, showing the note dispenser is ready to be floated. � The ‘Refill Notes’ screen will display the amount of notes per denomination required for a full float, for example, £5 NOTE £5 * 34 £10 NOTE £10 * 34 £20 NOTE £20 * 34 (This shows the amount of notes required to fully float the note dispenser) � Place the notes one at a time into the note acceptor head unit, as if entering notes in the normal manner. The relevant note level will decrease until reaching zero. � Once all notes have been entered, close the door and remove the Refill key. NOTE : PLEASE SEE ‘QUICK GUIDE – MD100 NOTE DISPENSER’ DOCUMENT FOR FURTHER DETAILS 5
Dump To Stacker (on ‘Refill Notes’ screen) Used for removing notes from the MD100 note dispenser. Once pressed, all notes contained within the MD100 note dispenser unit will be transferred to the ‘Stacker’ section where they can be manually removed. Hopper Level Displays the hopper level and float, � Level is the amount of coins in each hopper. � Float displays the level for a full float. Note Level Displays the amount of notes held in the MD100 note dispenser (per denomination). Last Bank Displays the last bank amount collected, including the time and date of the collected money. Last 50 Games Displays the last 50 games played including the game, stake, amount won, time and date. 6
Page 1 and 2: PLAYMAKER SERIES SERVICE MANUAL FOR
Page 3 and 4: HARDWARE OVERVIEW Playmaker Series
Page 5: REFILL MENU (FULL) TURN THE REFILL
Page 9 and 10: Volume Volume is set using the UP a
Page 11 and 12: 3.0 Lamps On entry to the Lamps men
Page 13 and 14: 9.0 Time & Date This is used to set
Page 15 and 16: � Float Level (for setting coin h
Page 17: BACTA CODE OF PRACTICE Under 18 yea

PLAYMAKER SERIES SERVICE MANUAL - Blueprint Gaming

Create successful ePaper yourself

Delete template?

Save as template?