interturbine Aviation Logistics GmbH
Vendor Parts Electronic Components Differential protection for generators: FDS1 FDS1 is used to secure three-phase current generators or three-phase synchronous and asynchronous motors. It registers differential currents within the guard band and trips when reaching the defined limits. Current time relay: FIS1 FIS1 monitors current in one-, two-, or threephase power networks. It is equipped with two limit value relays, which can be set independently of each other. Sensor monitoring relay: FLS2 FLS2 is used to monitor a hall sensor for measuring the speed. 38 Line monitor relay: FLS1 FLS1 checks possible disruptions or shortcircuits of digital lines. In addition, it protects and relieves sensitive command contacts. DC/DC under voltage relay: FUS2 FUS2 can be applied to monitor starter batteries on low voltage.
Electronic Components Power measuring and protective device: MES2 MES2 is used to register and monitor the electrical parameters of a three-phase supply network. Mains de-coupling device: MUS1 MUS1 serves to monitor a three-phase network on voltage, frequency, vector bounce and rotating field. Inverter Board: FUI1-04 Voltage comparator: FUV1 FUV1 has been developed to monitor the voltage equality of two batteries. Speed switching unit: MVDR1-2 MVDR1-2 is used to monitor the speed and can be employed on alternating current tacho generators. Measuring transducer: MAW1-16 39 Vendor Parts