YENIMAK Thermoforming Machines

High Speed 3/4 Stations
Thermoforming Machine
TFS
900-700
TFS 900/700 Series Thermoforming Machines designed completely by Yenimak
Makina are capable of production of disposable plastic bowls, plates, cover,
self-lidded containers, viol, vegetables and fruit cups.
Various plastic materials are available for selection, whether opting for traditional
polymer materials or plastics, such as recyclable plastics like rPET, bio-based
materials like PLA, or other common plastics (A-PET, PP, PS, PE) - we provide
the suitable machine solution.
Dimension of the machine
TECHNICAL FEATURES
Length
Width
Height
Weight
13 m - 14 m
2.80 m (with electric cabin)
2.85 m
17.500 kg (4 Stations) / 15.500 kg (3 Stations)
Maximum sheet width
Heaters power
950 mm (+50 mm streching)
130kW
Sheet thickness
Air requirement (7 bar pressure)
0.2 mm - 1.5 mm
6-8 m³/min.
Maximum product height
Cooling requirement
Positive : 140 mm
Negative : 140 mm
35.000 Kcal/h
Optimum heating
performance
Maximum cycle speed
70 cycles / min .(dry-run)
Vacuum pump capacity
200 m³
General control and intervention
possibility with remote access
connection to our Yenimak
Machines
Ergonomic design
Additional width
adjustment
Improved forming air
system
Maximum mold area
900x700 mm
Total installed power
180kW (3st.) | 200kW (4st.)
Clamping forces
Control unit
B&R - Beckhoff
Machine total operating power
40 - 70 kW
Forming station
Punching station
Cutting station
(60.000 daN Limited)
(60.000 daN Limited)
(80.000 daN Limited)
For high performance seekers
08 09