ET-7000/PET-7000 DIO Series User Manual - ICP DAS

More documents

Recommendations

Info

1.2. Features � Built in Web Server Each ET-7000/PET-7000 module has a built-in web server that allows users to easily configure, monitor and control the module from a remote location using a regular web browser. � Web HMI The Web HMI function allows the users to create dynamic and attractive web pages to monitor and control the I/O points. Users can upload specific I/O layout pictures (bmp, jpg, gif format) and define a description for each I/O point. No HTML or Java skills are needed to create the web pages. ET-7000/PET-7000 DIO Series User Manual, version 1.0.1 beta2 Page: 12 Copyright © 2009 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
� Communication Security Account and password are required when logging into the ET-7000/PET-7000 web server. An IP address filter is also included, which can be used to allow or deny connections with specific IP addresses. � Modbus Protocol The Modbus/TCP slave function on the Ethernet port can be used to provide data to remote SCADA software. � Built-in Multi-function I/O All Digital Output modules provide: Power on value (On boot up, the DO status is set to the Power-on value) Safe value (If Modbus/TCP communication is lost for a certain period, the DO status will be set to the user defined safe value) All Digital Input modules provide: High/Low latched status DI channels can also be used as DI status and 32-bit low speed (100Hz) counters. � All-in-one Module Various I/O components are mixed with multiple channels in a single module, which provides the most cost effective I/O usage and enhances performance of the I/O operations ET-7000/PET-7000 DIO Series User Manual, version 1.0.1 beta2 Page: 13 Copyright © 2009 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Page 1 and 2: Service and usage information for W
Page 3 and 4: Table of Contents 1. Introduction .
Page 5 and 6: 3.3.2.1. Configuring IP filter ....
Page 7 and 8: 1. Introduction The ET-7000/PET-700
Page 9 and 10: 1.1.2. ET-7000/PET-7000 Module Nami
Page 11: More information about PET-7000 The
Page 15 and 16: 1.3. Specification 1.3.1. System Sp
Page 17 and 18: 1.3.2. I/O Specification 1.3.2.1. E
Page 19 and 20: 1.3.2.2. ET-7044/PET-7044 ET-7000/P
Page 21 and 22: 1.3.2.3. ET-7050 Digital Input ET-7
Page 27 and 28: 1.3.2.6. ET-7053 ET-7000/PET-7000 D
Page 33 and 34: 1.3.2.9. ET-7066 ET-7000/PET-7000 D
Page 35 and 36: 1.3.2.10. ET-7067/PET-7067 ET-7000/
Page 37 and 38: 1.4. Wiring Connection 1.4.1. ET-70
Page 39 and 40: 1.4.4. ET-7053 1.4.5. ET-7060/PET-7
Page 41 and 42: 1.4.8. ET-7067/PET-7067 ET-7000/PET
Page 43 and 44: � J1 Connector Depending on the t
Page 45 and 46: 1.5.2. Back Panel The ET-7000/PET-7
Page 47 and 48: 1.6. Dimensions All dimensions are
Page 49 and 50: 2. Getting Started If you are a new
Page 51 and 52: 2.2. Configuring the Boot Mode The
Page 53 and 54: 2.4. Installing the MiniOS7 Utility
Page 55 and 56: Step 2: Press “F12” or choose
Page 57 and 58: Step 6: Reboot the module and then
Page 59 and 60: You can verify that it has been ins
Page 61 and 62: Step 3: Fill out the User name and
Page 63 and 64:
3.1. Overview The Overview links to
Page 65 and 66:
3.2. Configuration All items below
Page 67 and 68:
3.2.1.1. Configure the Network Sett
Page 69 and 70:
3.2.1.2. Check the software informa
Page 71 and 72:
3.2.2.1. Configure the Module Infor
Page 73 and 74:
� More Information URL: The URL o
Page 75 and 76:
3.2.2.3. Reset All Settings to Defa
Page 77 and 78:
Module I/O Settings The default set
Page 79 and 80:
3.2.3. Module I/O Settings The Comm
Page 81 and 82:
3.3.1. Account Management The Basic
Page 83 and 84:
3.3.1.2. Load the factory default u
Page 85 and 86:
3.3.2.1. Configuring IP filter The
Page 87 and 88:
3.4. Web HMI All items below are lo
Page 89 and 90:
3.4.2. Web Edit The Web Editing pag
Page 91 and 92:
Below is an example of how to creat
Page 93 and 94:
Step 3: Set the page name and selec
Page 95 and 96:
Step 8: Add a DO for writing Motor1
Page 97 and 98:
3.5. Pair Connection The Pair Conne
Page 99 and 100:
4. Modbus Applications The ET-7000/
Page 101 and 102:
4.2. Modbus Message Structure Modbu
Page 103 and 104:
4.2.2. Function Codes The second by
Page 105 and 106:
� (4xxxx) AO address Begin addres
Page 107 and 108:
4.3.2.1. ET-7042 I/O Address Mappin
Page 109 and 110:
4.3.2.2. ET-7044/PET-7044 I/O Addre
Page 111 and 112:
4.3.2.3. ET-7050 I/O and Counter Ad
Page 113 and 114:
Detailed Modbus Address Table for E
Page 115 and 116:
4.3.2.4. ET-7051/PET-7051 I/O and C
Page 117 and 118:
Page 119 and 120:
4.3.2.5. ET-7052/PET-7052 I/O and C
Page 121 and 122:
Page 123 and 124:
4.3.2.6. ET-7053 I/O and Counter Ad
Page 125 and 126:
Page 127 and 128:
4.3.2.7. ET-7060/PET-7060 I/O and C
Page 129 and 130:
Page 131 and 132:
4.3.2.8. ET-7065/PET-7065 I/O and C
Page 133 and 134:
Page 135 and 136:
4.3.2.9. ET-7066/PET-7066 I/O Addre
Page 137 and 138:
4.3.2.10. ET-7067/PET-7067 I/O Addr
Page 139 and 140:
5. MiniOS7 Utility Tool MiniOS7 Uti
Page 141 and 142:
Step 4: The connection has ready be
Page 143 and 144:
After executing the Quick Firmware
Page 145 and 146:
Step 2: Turn the switch to “Init
Page 147 and 148:
Step 6: Select the latest version o
Page 149 and 150:
5.4. Uploading the ET-7000/PET-7000
Page 151 and 152:
Step 4: Choose “Erase Disk” fro
Page 153 and 154:
After confirming the command, you j
Page 155 and 156:
6.2. OPC Server OPC (OLE for Proces
Page 157 and 158:
6.3.1. InduSoft InduSoft Web Studio
Page 159 and 160:
6.3.3. iFix The document containing
Page 161 and 162:
Appendix B. Modbus Application Note
Page 163 and 164:
B.3. Safe Value If the time of the
Page 165 and 166:
Address 40296 to 40327 records the
Page 167 and 168:
� Momentary Alarm The alarm statu
Page 169 and 170:
B.5. AI High/Low Latch The address
Page 171 and 172:
Average value of all AI channel The
Page 173:
Appendix C. Troubleshooting A numbe
show all

ET-7000/PET-7000 DIO Series User Manual - ICP DAS

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?