ET-7000/PET-7000 DIO Series User Manual - ICP DAS
ET-7000/PET-7000 DIO Series User Manual - ICP DAS
ET-7000/PET-7000 DIO Series User Manual - ICP DAS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Digital Input<br />
Input Channels 6<br />
Input Type Wet Contact (Sink, Source)<br />
On Voltage Level +10 VDC ~ +50 VDC<br />
Off Voltage Level +4 VDC max.<br />
Input Impedance 10 kOhm<br />
Max. Count: 4,294,967,285 (32 bits)<br />
Counters Max. Input Frequency: 500 Hz<br />
Overvoltage Protection +70 VDC<br />
Intra-module Isolation 3750 Vrms<br />
Digital Output<br />
Output Channels 6<br />
Min. Pulse Width: 1ms<br />
Output Type PhotoMOS Relay, Form A<br />
Load Voltage 60 VDC/VAC<br />
60 V/1.0A (Operating Temperature -25 °C ~ -40 °C)<br />
Load Current 60 V/0.8A (Operating Temperature +40 °C ~ +60 °C)<br />
Turn On Time 1.3 ms (Typical)<br />
Turn Off Time 0.1 ms (Typical)<br />
Relay Output Isolation 1500 Vrms<br />
Power Requirements<br />
Power Consumption 0.1A @ 24 VDC Max.<br />
60 V/0.7A (Operating Temperature +60 °C ~ +75 °C)<br />
<strong>ET</strong>-<strong>7000</strong>/P<strong>ET</strong>-<strong>7000</strong> <strong>DIO</strong> <strong>Series</strong> <strong>User</strong> <strong>Manual</strong>, version 1.0.1 beta2 Page: 32<br />
Copyright © 2009 <strong>ICP</strong> <strong>DAS</strong> Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Change language