ORCA AX 10 ORCA MX 10 ORCA WX 10 - Dr. Bender GmbH

22. Check the machine every day for signs of damage, conduct a visual inspection:
Before reusing the tool, carefully check the safety equipment or slightly damaged parts to ensure that
they offer perfect and proper function. Check that all moving parts function correctly, that they do not
jam and that none of the parts are damaged. All parts must be correctly fitted and satisfy all the
conditions to ensure the perfect operation of the tool. Damaged safety equipment and parts must be
repaired or replaced properly by a specialist service contractor. Do not use any tools, which cannot be
turned on and off using the switch. Pay particular attention to ensuring electrical safety: Cables?
Plugs? Switches? Do all the components satisfy safety regulations?
23. Repairs may only be carried out by trained personnel. Before being used for the first time and after all
repair work, the safety of electric tools must be checked by an electrician pursuant to VBG 4, § 5. This
inspection must also be conducted and documented at regular intervals – at least once per year.
24. Please note that as an operator, you are responsible for complying with any additional regulations. For
example, if electric tools are used in a wet and/or damp environment, the regulations of the ”Stone and
Earth” Professional Association must be satisfied. To make their use with insulating transformer
possible, the corresponding tools are also available in 115V versions. Please indicate this option when
placing the order.
25. Electrical safety and fire safety: just as DR. BENDER did in the last 20 years, the new version of VDE
0100 also recommends the additional safety protection and fire protection of each tool achieved by
using low cost FI and DI/PRCD circuit-breakers.
19