ORCA AX 10 ORCA MX 10 ORCA WX 10 - Dr. Bender GmbH

More documents

Recommendations

Info

2.3 Safety 6 Warning Before using the machine for the first time, check the conformity of the data on the model plate with the mains voltage and frequency. Voltage deviations of ± 5 % and/or voltage deviations of ± 2 % are permissible. Repairs may be carried out only by adequately qualified persons, based on their training and experience. The following points are to be given special attention: - the technical data and details of the permitted use of the machine (commissioning, ambient and operating conditions) which are set out among others in the catalogue, the operating manual, the model plate data and the other product information, - the relevant accident prevention regulations - the professional use of tools - the use of personal safety equipment 3.0 Transport and storage 3.1 Transport 3.2 Storage Warning The driving machines and the core drills are to be checked for signs of transport damage on receipt. Possibly existing damages must be basically documented in writing. If possible, the storage site should be dry, clean and have a constant temperature. To ensure that the film of lubricant in the bearings and sealing system is not lost, the motor shaft should be turned through several revolutions by hand after a lengthy period of storage, for example at monthly intervals. The roller bearings in the motors should be replaced (or re-greased) if the period between delivery and commissioning is over four years. If the machines are stored in adverse conditions, this period will be considerably reduced.
4.0 Main dimensions und technical data 4.1 Dimensions 4.1.1 ORCA AX10 4.1.2 ORCA MX10 7
Page 1 and 2: DR. BENDER GmbH Innovative Elektrow
Page 3 and 4: Contents Page Conformity declaratio
Page 5: 1.0 General Notes 1.1 Technical des
Page 9 and 10: 4.2 Technical data 4.2.1 ORCA AX10
Page 11 and 12: 4.2.5 ORCA WX10 E Rated voltage 400
Page 13 and 14: Connect the water supply. Caution:
Page 15 and 16: - when the tools remain unsupervise
Page 17 and 18: 9.0 Warranty In keeping with our te
Page 19 and 20: 22. Check the machine every day for
Page 21 and 22: Pos. Art-No. Description Pcs Pos. A
Page 23 and 24: Pos. Art-No. Description Pcs. Pos.
Page 29 and 30: Pos. Article number Description Pcs
Page 33 and 34: Pos. Article number Description Pcs
Page 35: Pos Art-No. Description Pcs. 1 2007

ORCA AX 10 ORCA MX 10 ORCA WX 10 - Dr. Bender GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?