Manual - Leybold Repair by Tech Services

Head
18 ⏐GA10218_0101 - 5/2002
Options for the sniffer line:
� Sniffer tip rigid 120 mm 12213
� Sniffer tip rigid 385 mm 12215
� Sniffer tip flexible 120 mm 12214
� Sniffer tip flexible 385 mm 12216
� Capillary filter metal ( for rough conditions) 12217
Spare parts for the sniffer line
� Capillary filter plastic (5 pcs) 20003501
� Sinter filter with seal (5 pcs) 20003500
� Felt disc for capillary filter (50 pcs) 200001116
1.4.2.2 Remote control
The remote control is to operate the PhoeniXL from distance up to 30 m
depending on the cable lenght. It provides the functions START, STOP/
VENT, ZERO and speaker volume, and displays leak rates in the bargraph.
(refer to Chapter 4.1.6 and 4.1.7)
1.4.2.3 Partial flow system (PhoeniXL 300 only)
In the partial flow mode the test sample is additionally evacuated by an
auxiliary pump. Using the optional partial flow pump set offers to the user
the following advantages:
� faster response
� entry into the measurement mode already at an inlet pressure of
1000 mbar
� faster venting of large test objects
The partial flow system consists of the components partial flow valve
block, right angle valve DN 25 KF, control cable and vacuum hose with
flange connections.
The partial flow valve block with the right angle valve has to be connected
to the inlet flange of the PhoeniXL 300 . Connect the control cable to the
Option port and the vacuum hose to the auxiliary pump. The PhoeniXL300 has to be configurated as described in chapter 6.6.1.4.
For further detailed information please refer to operating instructions GA
10.277 partial flow system.