Manual - Leybold Repair by Tech Services
Manual - Leybold Repair by Tech Services
Manual - Leybold Repair by Tech Services
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Head<br />
34 ⏐GA10218_0101 - 5/2002<br />
4.1.2 Control Panel<br />
The Control Panel Fig. 8 contains a liquid chrystal display (LC Display), the<br />
START, STOP, ZERO and MENU buttons and eight soft Keys for the different<br />
menus and inputs selections.<br />
3<br />
4<br />
1<br />
2<br />
9<br />
Fig. 8 Control Panel<br />
Pos. Description Pos. Description<br />
1 Soft Key no. 1 8 Soft Key no. 8<br />
2 Soft Key no. 2 9 LC Display<br />
3 Soft Key no. 3 10 START<br />
4 Soft Key no. 4 11 ZERO<br />
5 Soft Key no. 5 12 STOP<br />
6 Soft Key no. 6 13 MENU<br />
7 Soft Key no. 7<br />
4.1.2.1 LC Display<br />
The LC Display Fig. 8/1 is the communication interface to the operator. It<br />
displays the leak rates, the status report of the PhoeniXL, messages,<br />
warnings and errors. With the soft keys no.1 to no. 8 various functions<br />
which are shown in the display can be selected<br />
4.1.2.2 START Button<br />
Pushing the START Button Fig. 8/10 enables the PhoeniXL to start the<br />
measure procedure. The measured leak rate is shown in the display. If the<br />
START button is pushed again in measurement mode, the maximum leak<br />
rate indicator („hold“ function) is acitvated. This indicator shows the maximum<br />
leak rate since „START“. By pressing the START-button again the<br />
„hold“ function will be started again.<br />
4.1.2.3 STOP Button<br />
Pushing the STOP Button Fig. 8/12 interupts the measure procedure. If<br />
the button is pressed longer the inlet is vented acording to the conditions<br />
defined in the menu Vent delay. See Chapter 6.6.1.2 to select the time<br />
parameters of the venting.<br />
5<br />
6<br />
7<br />
8<br />
13<br />
10<br />
11<br />
12
Change language