18.01.2013 Views

Service Manual - Humatem

Service Manual - Humatem

Service Manual - Humatem

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

28 Infant Flow ® SiPAP<br />

• an audible Whistle which sounds a constant tone when the gas imbalance<br />

limits are exceeded.<br />

• an audible Alarm which sounds a constant tone or two different intermittent<br />

tones; medium or high level (medium level sounds beep.beep.beep every 15<br />

seconds and high level sounds beep.beep..beep beep beep every 10 seconds).<br />

• a visual Warning Bar which flashes red continuously, flashes intermittently or<br />

comes on continuously.<br />

• an Alarm Button on the touch screen status bar which flashes continuously.<br />

Other indications are given to indicate the status of the condition. Refer to Table 2 for<br />

alarms and indications for specified conditions.<br />

Diagnostic Screen<br />

A diagnostic screen is provided for low level calibration, test procedures for valves<br />

and an error log. Figure 5 shows the screen display. Labeling of Diagnostic screen<br />

will be the same regardless of configuration.<br />

Figure 5 - Diagnostic Screen<br />

675-120 Revision C November 2004<br />

-

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!