Theben: Home & Building Control Systems KNX

SYSTEMS
MIX actuators with low-cost channel price
MIX your functions the way you want, now with even more options including extensions up to 24 channels. The
new MIX 2 series offers C-Load and Current Monitoring with a new practical and time saving copy function
to additional channels. The BCU is removable; configuration can be done at your desk so installation and start
up of the actuator can take place when you want. Testing can be executed independently from the bus as well
thanks to the manual switch. -SERIES
MIX 2 SERIES
8 channel actuator RMG 8 S with basic
and extension devices RME 8 S
Modular upgrade of up to 24 channels
can be combined with all MIX upgrade
devices.
EASE OF INSTALLATION
Actuators with removable bus coupling
unit enables manual set-up even without
bus coupling unit.
Insertable connector on extension devices
simplify installation/dismantling, because
it is not necessary to move the devices.
MANY FUNCTIONS
Manual Switch with status display (also
without bus voltage):
adjustable features, switching, delayed
switching, impulse function, logical links,
type of contact (NC contact/NO contact)
and participation in central commands
such as continuous On, continuous Off,
central switching and save/call up scene
C-LOAD
The 4 channel actuators RMG 4I, upgradeable
to 12 channels via the RME 4 I
modules are designed specifically for high
lamp load (16 AX)
WITH CURRENT METERING
Additionally, the load current is measure in
each channel and sent to the BUS. Thus, all
outputs are monitored.
Actuators
KNX
5