Theben: Home & Building Control Systems KNX

RMG 4 I KNX
Switch actuators
KNX SYSTEMS
Actuators C load 4–12 channels MIX 2
RMG 4 I KNX RME 4 I KNX
Description
Common functions
■ 4-way C load switching actuator MIX 2
■ With current recognition
■ For higher lamp loads
■ Up to two extension modules MIX 1 or MIX
2 can be connected to one basic module
■ Device and KNX bus module can be
swapped independently of each other
■ Removable KNX bus module enables devices
to be changed without repro-gramming
6
■ Manual set-up and use of switching actuators
is possible without KNX bus module
■ LED switching status display for each channel
■ Manual operation on device (even without
bus connection)
■ Switching functions: E.g. On/Off, pulse, On/
Off delay, staircase light with warning
■ Logical links: e.g. lock, AND, release, OR
Product selection Technical data
Type Article number
RMG 4 I KNX 4930210
RME 4 I KNX 4930215
Connection example
RMG 4 I KNX
L N
3 4 5 6
C1 C2
7 8 9 10
C3
KNX
C4
N LL
httpAdditional technical data at:
www.theben.de/product/ Article number
RMG 4 I KNX
■ Basic module MIX 2
■ Can be upgraded to maximum of
12 channels
RME 4 I KNX
■ Extension module MIX 2
■ For upgrading to maximum of
12 channels
RMG 4 I KNX RME 4 I KNX
Operating voltage KNX Bus voltage, (< 10 mA) –
Operating voltage 110–240 V AC
Frequency 45–65 Hz
Stand-by consumption 1,3 W 0,0 W
Width 4 modules
Type of contact
NO contact, 16 A (at 250 V AC, cos φ = 1),
16 A (at 250 V AC, cos φ = 0.6)
Ambient temperature –5 °C…+45 °C
Protection rating IP 20
Protection class II in accordance with EN 60 730-1
RME 4 I KNX
L N
3 4 5 6
C1 C2
7 8 9 10
C3 C4
N LL