ENSACO® Conductive Carbon Black for polymer ... - Timcal Graphite
ENSACO® Conductive Carbon Black for polymer ... - Timcal Graphite
ENSACO® Conductive Carbon Black for polymer ... - Timcal Graphite
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6<br />
Typical values<br />
www.timcal.com<br />
ENSACO ® <strong>Conductive</strong> <strong>Carbon</strong> <strong>Black</strong><br />
<strong>for</strong> <strong>polymer</strong> compounds<br />
Property Test Method Unit ENSACO 150 G ENSACO 210 G ENSACO 250 G ENSACO 260 G ENSACO 350 G<br />
Form Granules (*) Granules Granules (*) Granules Granules<br />
BET Nitrogen Surface Area<br />
ASTM D3037<br />
OAN<br />
Absorption<br />
ASTM D2414 (1)<br />
COAN Crushed OAN<br />
ASTM D2414 (1)<br />
Pour Density<br />
ASTM D1513<br />
Moisture (as packed)<br />
ASTM D1509<br />
Sieve residue<br />
325 mesh (45 µm)<br />
ASTM D1514<br />
Ash Content<br />
ASTM D1506<br />
Volatile Content<br />
TIMCAL Method 02 (2)<br />
Sulphur Content<br />
ASTM D1619<br />
Toluene Extract<br />
ASTM D4527<br />
pH<br />
ASTM D1512<br />
Volume Resistivity<br />
TIMCAL Method 11 (3) (4)<br />
m2/g<br />
ml/100 g<br />
ml/100 g<br />
kg/m3<br />
%<br />
ppm<br />
%<br />
%<br />
%<br />
%<br />
Ohm.cm<br />
50<br />
165<br />
95<br />
190<br />
0.1<br />
2<br />
0.1<br />
0.2 max<br />
0.5 max<br />
0.1 max<br />
8-11<br />
2000 max (3)<br />
55<br />
155<br />
95<br />
210<br />
0.1<br />
2<br />
0.1<br />
0.2 max<br />
0.5 max<br />
0.1 max<br />
8-11<br />
500 max (3)<br />
65<br />
190<br />
104<br />
170<br />
0.1<br />
2<br />
0.01<br />
0.2 max<br />
0.02<br />
0.1 max<br />
8-11<br />
10 max (3)<br />
70<br />
190<br />
104<br />
170<br />
0.1<br />
2<br />
0.01<br />
0.2 max<br />
0.02<br />
0.1 max<br />
8-11<br />
5 max (3)<br />
(1) Spring: 0.9 lbs/inch; 10 g of carbon black - (2) Weight loss during heating between 105 and 950°C - (3) 25% carbon black in HDPE Finathene 47100<br />
(4) 15% carbon black in HDPE Finathene 47100<br />
(*)<strong>ENSACO®</strong> 150 and <strong>ENSACO®</strong> 250 are also available in powder <strong>for</strong>m.<br />
770<br />
320<br />
270<br />
135<br />
1 max<br />
10<br />
0.03<br />
0.3 max<br />
0.02<br />
0.1 max<br />
8-11<br />
20 max (4)