LTI ULTRALYTE 1000 LASER Speed - Tele-Traffic

More documents

Recommendations

Info

9. On Start-up all previous data will be cleared from the data log. Once the data log has been cleared the main screen is then displayed as shown below. The user will now be prompted with 2 options on the bottom of the screen DVD and DCU. F 18:25:15 L 48 12345678 03-08-04 DVD DCU Ranger DVD system ready/default start up screen ADJUSTING THE DISPLAY CONTROL UNIT The Ranger DVD captures live video (via the camera) then overlays a text display from the D.C.U. before recording it to a +R D.V.D. disk. The whole system is controlled by the Operator inputting commands via a from a touch panel mounted within the monitor screen. The system is designed when the power is switched on to run through a series of internal self checks which are indicated on the viewing monitor should any fail. When the unit is in user mode after passing its self checks the operator will navigate via the menu system to the DCU (display control unit) and set required parameters e.g. date, time, user number, site number and speed thresholds. By pressing the DCU Option the user will gain access to the DCU setup controls, press ENTER and this will give the user access to the DCU setup menu. This menu is navigated by using the UP, DOWN, LEFT, RIGHT & ENTER on screen buttons. Finally to exit this menu press the EXIT button to return to the DVD & DCU menu options. This is a major change from the previous unit ALL controls are now accessed through an on screen touch menu. 16 © Tele-Traffic UK Ltd 2010
Entering and navigating the DCU menu Press the DCU Option. The DCU menu allows complete access to all the system control functions. On entering the main menu, the following menu will be displayed. SET LIMIT OPTIONS SET USER NUMBER SET TIME/DATE SET CROSS-HAIR SET DISPLAY OPTIONS DATA LOG OPTIONS SYSTEM OPTIONS Use the ‘Up ’ and ‘Down Options’ to change the highlighted selection within a menu. Use the ‘Enter Option’ to enter a highlighted sub-menu or control function selection. Setting the Speed Enforcement Threshold To set the Speed Enforcement Threshold, follow the steps below. 1. Enter the DCU menu by pressing symbol on screen. On entering the main menu, the following menu will be displayed. SET LIMIT OPTIONS SET USER NUMBER SET TIME/DATE SET CROSS-HAIR SET DISPLAY OPTIONS DATA LOG OPTIONS SYSTEM OPTIONS 17 EXIT UP DOWN LEFT RIGHT ENTER EXIT UP DOWN LEFT RIGHT ENTER © Tele-Traffic UK Ltd 2010
Page 1 and 2: LTI ULTRALYTE 1000 LASER Speed MEAS
Page 3 and 4: TELE-TRAFFIC (UK) LIMITED LTI 20.20
Page 5 and 6: SECTION 1 SYSTEM DESCRIPTION CONTEN
Page 7 and 8: 1. THE LASER. LTI 20.20 UltraLyte 1
Page 9 and 10: SECTION 2 SYSTEM APPLICATION How th
Page 11 and 12: Below is an example of how the data
Page 13 and 14: RANGER DVD SYSTEM OPERATOR INSTRUCT
Page 15: YOU MAY NOW BEGIN YOUR OPERATIONAL
Page 19 and 20: 4. Highlight the ‘SET SPEED THRES
Page 21 and 22: 2. Highlight the ‘SET LIMIT OPTIO
Page 23 and 24: 6. Adjusting the speed limit in the
Page 25 and 26: 4. Adjusting the user number in the
Page 27 and 28: 4. Adjusting the time/date in the
Page 29 and 30: 4. Highlight the ‘SET POSITION’
Page 31 and 32: 2. Highlight the ‘SET CROSS-HAIR
Page 33 and 34: 6. Adjusting the cross-hair type in
Page 35 and 36: TYPE: BLACK BOX TYPE: OFF 35 EXIT U
Page 37 and 38: 3. Enter the ‘SET CROSS-HAIR’ m
Page 39 and 40: Setting the cross-hair Gap size To
Page 41 and 42: 5. Entering the ‘SET GAP’ contr
Page 43 and 44: 3. Enter the ‘SET DISPLAY OPTIONS
Page 45 and 46: Setting the background level To set
Page 47 and 48: 5. Entering the ‘SET BACKGROUND L
Page 49 and 50: 3. Enter the ‘DATA LOG OPTIONS’
Page 51 and 52: Clearing the data log To clear the
Page 53 and 54: 5. Entering the ‘CLEAR DATA LOG
Page 55 and 56: Downloading the data log To downloa
Page 57 and 58: 5. Entering the ‘DOWNLOAD DATA LO
Page 59 and 60: Viewing the DCU system status page
Page 61 and 62: 5. Entering the ‘DCU STATUS’ vi
Page 63 and 64: Description The Ranger system now i
Page 65 and 66: 3. Entering the DVD into the record
Page 67 and 68:
Followed by:- F 18:25:15 L 48 12345
Page 69 and 70:
When the STOP is pressed this scree
Page 71 and 72:
And then:- F 18:25:15 L 48 12345678
Page 73 and 74:
7. Interruptions to the power suppl
Page 75 and 76:
2. To access the Exposure setting.
Page 77:
4. Exiting the camera set up menu.
show all

LTI ULTRALYTE 1000 LASER Speed - Tele-Traffic

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?