TRILUX Luminaires - Proljus AB

Optilux
Linear Floodlight
65a IP54
Linear floodlight with symmetrical light
distribution
Floodlight housing
made of high-quality anodised aluminium
with pressure equalisation vent. Housing
with angle scale to facilitate the inclination
adjustment.
Cover made of 5 mm thick, thermally toughened
safety glass, secured in a galvanised
steel frame with a silicon seal using nonrusting
clips, a mesh cover is not necessary.
Fixing bracket made of galvanised steel,
continuously adjustable, suited for upright
and suspended mounting of floodlight.
Optical system
Floodlight housing made of anodised aluminium
and forming the linear reflector.
With additional, internal highly-specular
cover for reducing the luminous intensity in
the C90–C270 plane.
B Symmetrical, wide-angle light distribution.
T Symmetrical narrow-angle light distribution
with additional, highly-specular
reflectors.
Re-lamping is simple tool-free process,
just open and suspend the cover.
Electrical connection
via 3-pole terminal for wires up to 2.5 mm².
With cable gland Pg16.
156
Versions available either with or without
ignitor. Other components required for the
operation of the floodlight must be ordered
separately and mounted, see Accessories.
Control gear box 0860GK···, either for
one or two floodlights made of sheet steel,
light grey, similar to RAL 7035, powder-coated,
weather-resistant. With lockable cover.
Complete with all necessary control gear,
prewired ready for connection. With two or
three cable glands M20 for cables up to
6–12 mm. Mains-side connection terminal
5 x 6 mm², luminaire-side terminals
2 x 3 x 6 mm². Parallel-compensated.
Safety class I, degree of protection IP65.
Supply unit 0860VE··· for one floodlight
including Neozed fuse 16 A and 8-pole
screw-type terminal for wires up to 6 mm².
With two cable glands M20 for cables up to
7–14 mm. Fixed via two boreholes 12 mm.
Parallel-compensated. Safety class I, degree
of protection IP65.
Supports TW··· made of galvanised steel,
for mounting of 1, 2 or 3-4 floodlights. For
pole top diameter 89-114 mm. Including
fixing components for the floodlights.
TW1/114 M20
M20
M20
89-114
M20
Pg16
TW2/114
995
895
89-114
Pg16
TW3-4/114
M20
1300
1200
1000
89-114
Pg16
7-402···
M20
M20