TRILUX Luminaires - Proljus AB

HS
Decorative bollard and wall luminaires
65a IP54
Decorative bollard luminaire in single or
double-head configurations (···M2···) and
wall luminaire in three construction sizes.
Luminaire housing of cast aluminium.
Supporting column of HS 80··· bollard
luminaire of extruded aluminium section
with welded baseplate of cast aluminium.
Protective grid of cast aluminium (HS II···,
HS III···).
Colour anthracite, similar to DB703 with
metal effect (colour code ···26) or grey-white,
similar to RAL 9002 (colour code ···24), highly
weather-resistant, powder-coated.
Fixing of HS 80··· bollard luminaire via integral
flange plate to solid surface or with use
of an underground support in the substrate,
to be ordered separately. Fixing of wall luminaire
with mounting plate of cast aluminium.
Cover glass of durable borosilicate (HS 80···,
HS I···) or of non-laminated safety glass
(HS II···, HS III···).
Relamping following tool-free removal of
cover glass with bayonet catch (HS 80···,
HS I···) or after release of a safety screw and
removal of luminaire housing from mounting
plate (HS II···, HS III···).
Electrical connection with 3-pole connection
terminal for wires up to 1.5 mm². With
HS 80··· with 3-pole connection terminal for
wires up to 4 mm² on connection unit of the
flange plate.
Control gear options
···L with inductive ballast.
···ET with electronic transformer.
···KT with conventional transformer.
Mains No power supply equipment required,
lamp operation directly from mains power.
Underground support
Underground support of steel, galvanised, for
installation of HS 80··· bollard luminaire in
substrate.
Further versions on request.
222
500
0804E-5
M6
100
70
120°
HS 80···24
HS 80···
800
7
150
70
175 110
50
120°
200
HS 80-M2···
800
7
300 110
150
70
HS 80-M2···26
50
120°
200