TRILUX Luminaires - Proljus AB

LS
Decorative bollard and wall luminaires with triangular section
65a IP44
Decorative bollard or wall luminaire with
triangular section (···D···).
Supporting column with 120 D··· bollard
luminaire of extruded aluminium section,
triangular section with welded baseplate of
cast aluminium. Upper cover plate of cast
aluminium.
Wall plate with ···W··· version of cast
aluminium.
Colour anthracite, similar to DB703, with
metal effect, highly weather-resistant,
powder-coated (colour code ···26).
Mounting of LS 120··· bollard luminaire via
integral flange plate for direct mounting to
firm surface or with use of an underground
support in the substrate, to be ordered separately.
Mounting of ···W··· wall luminaire via
mounting plate.
Cover of lamp compartment of non-laminated
safety glass with printed wire glass
design and three-sided light emission. ···W···
wall luminaire closed on rear.
Optical system of anodised aluminium with
rotationally symmetrical wide angle light
distribution. Versions with E27 socket with
additional glare reduction of lamp.
188
LS 120 D···
Relamping via release of three stainless
steel screws and removal of upper cover
plate.
Electrical connection with 5-pole connection
terminal for wires up to 2 x 4.0 mm².
···W··· with 4-pole connection terminal for
wires up to 2 x 2.5 mm².
Control gear options
···L with inductive ballast.
···L+KT with inductive ballast and
conventional t ransformer.
Underground support of steel, galvanised,
for fixing of bollard luminaire in substrate.
Further versions on request.
LS W-D···