LED-Flatlight-Spot d60 - Henning GmbH
LED-Flatlight-Spot d60 - Henning GmbH
LED-Flatlight-Spot d60 - Henning GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
WEIGHTWATCHER LIGHT OVER-LOAD COnTROL SySTEM 1.1<br />
Evaluation unit AE16 light<br />
In addition to 16 independent measuring channels, AE16 offers 3 freely programmable<br />
output relays with changeover contacts.<br />
This unit can be programmed by its keys. Rope load sensors LS-light are to be ordered<br />
separately according to your needs.<br />
Technical Data:<br />
Power supply voltage 12 V - 28 V DC<br />
Power consumption < 0,8 W<br />
Number of relay outputs 3<br />
max. switching voltage 250 VAC<br />
Number of measuring channels 16<br />
HOLD input 12 V - 230 V AC/DC<br />
CANopen (optional) DSP 417<br />
Analogue output (optional) 0 - 20 mA<br />
4 - 20 mA<br />
Type Article-no.<br />
Evaluation unit AE16 light 456000<br />
Evaluation unit AE8 light<br />
Up to 8 sensors can be connected by their 2,5-m-cables to the evaluation unit AE8 light.<br />
This is connected to the lift control unit via 2 freely programmable alarm-relays or an<br />
optional analog output.<br />
Under preparation is a CANopen execution of AE8 light. Configuration of the unit is<br />
executed by three buttons and the 5-digit <strong>LED</strong>-indicator. AE8 light is highly energyefficient<br />
with regard to its typical power draw of less than 0,8 W.<br />
Technical Data:<br />
Power supply voltage 12 - 28 VDC<br />
Power consumption max. 0,8 W<br />
Number of relay outputs 2<br />
max. switching voltage 250 VAC<br />
Number of measuring channels 8<br />
Type Article-no.<br />
Evaluation unit AE8 light 456100<br />
1<br />
13