LED-Flatlight-Spot d60 - Henning GmbH
LED-Flatlight-Spot d60 - Henning GmbH
LED-Flatlight-Spot d60 - Henning GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MOBILE WEIGHTWATCHER ROPE LOAD MEASuRInG SySTEM 1.3<br />
MOBILE WEIGHTWATCHER ROPE LOAD<br />
MEASuRInG SySTEM<br />
Inadequately set ropes and excessive overall weights cause an undesired and premature wear. The WeightWatcher rope load measuring system allows ropes to be set and lift<br />
car and counterweight loads to be weighed in no time at all.<br />
The LSM-Belt sensor especially developed for belts allows measurements to be carried out on 30 to 60 mm wide belts.<br />
The integrated rope setting assistant guides you through the rope setting procedure and records every measurement with a report that can later be printed out on the PC.<br />
This makes the mobile WeightWatcher an optimum tool for your service work. Apart from weighing the lift car and counterweight loads, all single rope loads can be displayed and<br />
adjusted within a few minutes to their optimum settings using the integrated rope setting assistant.<br />
Highligts of the mobile WeightWatcher:<br />
• Time-saving adjustment of rope tensions<br />
• Quick measurement of lift car and counterweight loads<br />
• LSM rope load sensors with quick-action clamping facility<br />
• Integrated software assistant for an ideal setting of single<br />
rope tensions<br />
• For different rope diameters and rope types dia. 4-10 mm, dia. 6-16<br />
or dia. 16-24 mm as well as for belts<br />
• No calibration with weights necessary<br />
• 12 measuring channels for up to 12 ropes<br />
• Stores up to 100 measurements<br />
• Report can be printed out via the supplied PC software<br />
Operation of the mobile WeightWatcher:<br />
Every rope is fitted with a load sensor. After the sensor is put against the rope only a<br />
clamping lever has to be shifted.<br />
Up to 12 sensors are simply plugged into the evaluation unit MSM12 which – without<br />
any calibration with weights – immediately displays the overall weight and the individual<br />
rope loads.<br />
A uniform rope setting is now extremely easy: within a few minutes an integrated rope<br />
load assistant guides you through the single rope adjustment steps which the software<br />
has already calculated in advance.<br />
The rope load assistant specifies a setting for each single rope.<br />
The rope setting can be stored in the unit for documentation purposes.<br />
This allows the ropes to be set in a comfortable manner even with complicated suspension<br />
modes and a high number of ropes and no longer costs a lot of time.<br />
It is also possible to store as much as 100 rope load measurements in the internal memory<br />
of the MSM12 which can later be transferred to a database using the free software<br />
for quality assurance purposes or be archived as a printed document.<br />
1<br />
17