LED-Flatlight-Spot d60 - Henning GmbH

More documents

Recommendations

Info

5 88 5.5 Car Apron Car Apron, Bipartite Or Tripartite In compliance with DIN EN 81-1/2 8.4, the elevator car has to be equipped with a Apron under the car sill of at least 0,75 m height. In case of low shaft pits, this skirting can be telescoping. • Complete kit • Apron sheets from stainless steel (zinc-plated) • 2 adjustable supports (3 mm thick) with pivoting fixing angles • 2 safety contacts monitoring the extended position • Fitting time 30 to 40 min. • Connecting cable HO7RN-F 2 x 1 mm², 3 m long is included • Silent operation • Height 750 mm • Telescoped dimension • of bipartite execution 450 mm • of tripartite execution 390 mm • Executed either in stainless steel or painted in black (upon inquiry) Type Applied for Article-no. Car Apron, Zinc-Plated, Bipartite Apron bipartite PL800, h = 450 mm door opening 800 mm 335400 Apron bipartite PL800, h = 450 mm door opening 900 mm 335410 Apron bipartite PL800, h = 450 mm door opening 1000 mm 335420 Apron bipartite PL800, h = 450 mm door opening 1100 mm 335430 Type Applied for Article-no. Fahrkorbschürze, verzinkt, 3-teilig Apron tripartite PL700, h = 390 mm door opening 700 mm 335445 Apron tripartite PL800, h = 390 mm door opening 800 mm 335450 Apron tripartite PL900, h = 390 mm door opening 900 mm 335460 Apron tripartite PL1000, h = 390 mm door opening 1000 mm 335470 Apron tripartite PL1000, h = 390 mm door opening 1100 mm 335480 Car Apron, Invariable • Complete Kit • Made from zinc-plated steel sheet metal, Execution in stainless steel upon inquiry • 2 adjustable supports with pivoting fixing angles • Fitting time 30 to 40 min • Height 750 mm Type Applied for Article-no. Car Apron, Zinc-Plated, Invariable Apron invariable h = 750 mm, b = 800 mm door opening 800 mm 335510 Apron invariable h = 750 mm, b = 900 mm door opening 900 mm 335520 Apron invariable h = 750 mm, b = 1000 mm door opening 1000 mm 335530 Apron invariable h = 750 mm, b = 1100 mm door opening 1100 mm 335540
196 mm 294 mm 99 mm 521 mm 479 mm 140 mm 241 mm 257 mm 219 mm dimensions (mm) 124 mm 31 mm 442 mm ROPE GRIPPER TM Rope brake conform to A3 ROPE GRIPPER TM 5.6 Protection against overspeed and uncontrolled lift car movements • Protective device preventing an inadvertent movement of the lift car at landings when doors are opened • Protective device preventing ropes from slipping on the traction sheave • Protective device preventing the lift car from overspeeding during upward rides Dependable locking of ropes • Causes no rope wear • Does not expose drives and ropes to excessive loads • Easily replaceable, asbestos-free and nonmetallic linings • Ropes are quickly and carefully locked Compact – one-piece design • No separate hydraulics • Adapts to almost any kind of application • Easily installed Mechanically adjustable • Immediately trips in case of power failure • Smooth and reliable operation Electrically operated • Automatic normal operation when power supply is restored • Manually reset in case of fault 230V AC – 50 Hz – 3 A Technical data (max. values): Rope Gripper TM G 620 suspension 1 :1 suspension 2 :1 Nominal speed max. 1,78 m/s 1,27 m/s Tripping speed max. 2,04 m/s 1,54 m/s Nominal lift car load max. 1134 kg 2268 kg Total load from lift car, nominal load, counterweight, compensation rope max. 5216 kg 10432 kg Doorway max. 254 mm ± 254 mm ± Further types for low/high speed/car load on request. Type Article-no. ROPE GRIPPER TM G 620 rope brake 334100 5 89
Page 1 and 2:
Elevator components MASTER CATALOGu
Page 3:
ie Product Page WEIGHTWATCHER Over-
Page 7 and 8:
Weight Watcher Weight Watcher light
Page 9 and 10:
WEIGHTWATCHER OVER-LOAD COnTROL SyS
Page 11 and 12:
LS 2000 WEIGHTWATCHER OVER-LOAD COn
Page 13 and 14:
WEIGHTWATCHER LIGHT OVER-LOAD COnTR
Page 15 and 16:
WEIGHTWATCHER LIGHT MultiRope OVER-
Page 17 and 18:
MOBILE WEIGHTWATCHER ROPE LOAD MEAS
Page 19 and 20:
Page 21 and 22:
Page 23:
Page 26 and 27:
2 26 2.0 Lift PC ® MOBILE DIAGNOSI
Page 28 and 29:
2 28 2.0 Lift PC ® MOBILE DIAGNOSI
Page 31 and 32:
DAMPInG TECHnOLOGy 3 31
Page 33 and 34:
Application data type LP 40: Type s
Page 35 and 36:
Standard C Standard E Standard G St
Page 37 and 38: For technical drawings please refer
Page 45: Shape A Shape B Shape C Shape D For
Page 48 and 49: 4 48
Page 50 and 51: 4 50 4.0 LED-Flatlight-Spot LED-Fla
Page 56 and 57: 4 56 4.0 LED Spot LED Spot d77 LED
Page 58 and 59: 4 58 4.1 LED Flatlight-Panel Comple
Page 60 and 61: 4 60 4.1 LED Flatlight-Panel Framel
Page 62 and 63: 4 62 4.1 LED Flatlight-Panel Kabine
Page 64 and 65: 4 64 4.2 Landing lighting Goods lif
Page 66 and 67: 4 66 4.2 Landing Lighting Landing L
Page 68 and 69: 4 68 4.3 Shaft Illumination Shaft I
Page 71 and 72: CAB EQuIPMEnT 5 71
Page 73 and 74: FD4 Landing Indicator & Voice Annou
Page 75 and 76: Comparison of SafeLine MX and SL6 S
Page 77 and 78: Mobile Telephone Module GL1 Emergen
Page 79 and 80: Emergency Lift Telephone 5.1 Fire a
Page 81 and 82: Assembly tools 5.2 Plumb-Holding De
Page 83 and 84: Rail Alignment Indicator Assembly t
Page 85 and 86: False Car, A Rail-Guided Installati
Page 87: Handrail for the cabin roof 5.4 han
Page 92: 92 Henning GmbH & Co. KG Industrieg
show all

LED-Flatlight-Spot d60 - Henning GmbH

Create successful ePaper yourself

Delete template?

Save as template?