LED-Flatlight-Spot d60 - Henning GmbH

MOBILE WEIGHTWATCHER ROPE LOAD MEASuRInG SySTEM 1.3
Mobiler Seilsensor LSM2 (4 - 10 mm)
LSM2 is designed according to a patented measuring principle that does no longer
require any expensive elevator calibration by testing weights.
This rope load sensor suits rope diameters from 4 mm (3/16 inch) to 10 mm (3/8 inch)
and can be applied straightaway. Its excentric lever allows the sensor to be fitted to
the rope within a few seconds.
LSM2 is equipped with a mains cable of 0,8 m length.
Technical Data
Rope diameter 4 mm - 10 mm / 3/16 inch - 3/8 inch
Measuring range 0 - 300 kg (+ 2,5%)
Maximum load 600 kg
Breaking load 1200 kg
L x W x H (mm) 178 x 58 x 16
Cable length 0,8 m / 31,5 inch
Temperature range 0 °C - 70 °C
Type Article-no.
Mobile Rope Load Sensor LSM2 (4 - 10 mm / 3/16 - 3/8 inch) 455700
LSM connection cable extension up to 20 m 455620
Mobile Rope Load Sensor LSM-XL
(16 - 24 mm / 5/8 - 15/16 inch)
LSM-XL is designed according to a patented measuring principle that does no longer
require the expensive elevator calibration by testing weights. This rope load sensor
suits rope diameters from 16 mm (5/8 inch) to 24 mm (15/16 inch) and can be applied
straightaway. Its excentric lever allows the sensor to be fitted to the rope within a few
seconds.
It is equipped with a mains cable of 1,5 m length.
For transportation we recommend transport case No. 455310 suitable for up to
6 rope load sensors.
Technical data:
Rope diameter 16 mm - 24 mm / 5/8 inch - 15/16 inch
Measuring range 200 - 2000 kg (+ 3,5%)
Maximum load 4000 kg
Breaking load 6000 kg
L x B x H (mm) 570 x 210 x 50
Cable length 1,5 m / 59,06 inch
Temperature range 0 °C - 70 °C
Type Article-no.
Mobile Rope Load Sensor LSM-XL (16 - 24 mm / 5/8 - 15/16
Inch)
455350
LSM connection cable extension up to 20 m 455620
1
21