LED-Flatlight-Spot d60 - Henning GmbH

4
58
4.1 LED Flatlight-Panel
Complete panel – Mounted by one man
stainless steel ceiling ceiling with complete panel
IP40
IP43
Panel features:
130°
RoHS
● Extremely homogenous, high-intensity lighting area
● Bright cab lighting also in the upper area thanks to
wide radiation angle
● Elegant stainless steel enclosure only 30 mm high
● Including polycarbonate pane
● Articel-No.466000 and 466005 has limited resistance to
scratching, impact and fi re thanks to 3 mm tempered
safety glass pane
● Attached using two unobtrusive and hardly accessible
grub screws (on the side)
● Mounted by only one man, ideal also for retrofi tting
● LED panel replaceable from the cab end.
● Including power unit 100-240 V, 50-60 Hz
Power unit and current controller are located on the cab roof.
Required number of lamps conform to EN81-1/2
at the time this catalogue is printed:
one panel 300 x 300 for stainless steel cab up to 1.8 m 2
with longest side 1.5 m and 2.2 m ceiling height
III
Type Article-no.
Complete fl atlight panel 300 x 300 natural 466000
Complete fl atlight panel 440 x 440 natural 466002
Complete fl atlight panel 600 x 300 natural 466004
Complete fl atlight panel 300 x 300 daylight 466005
Complete fl atlight panel 440 x 440 daylight 466007
Complete fl atlight panel 600 x 300 daylight 466009
Accessories Article-no.
Panel-dimmer 466010
CN11-24 V-extern change-over box for emergency lighting
operation in case of power failure, external supply 18-30 V/5 W
With the LED fl atlight series
you can achieve
energy effi ciency class A
for your lift system.
466015
A A
B
C
D
E
F
G