Catalogue Bore machining Chapter Roughing - komet group
Catalogue Bore machining Chapter Roughing - komet group
Catalogue Bore machining Chapter Roughing - komet group
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1<br />
2<br />
KOMET TwinKom® G01 X 196 – 401 mm<br />
Twin Cutter with ABS® Connection, � = 90° / 80°<br />
(ABS-VD)<br />
x d1<br />
ABS<br />
x d<br />
182<br />
L<br />
�<br />
ap<br />
7<br />
6<br />
x D min<br />
x Dmax<br />
Insert<br />
seating<br />
1<br />
� = 90°<br />
Insert<br />
seating<br />
2<br />
� = 80°<br />
with axial adjustment<br />
reduced<br />
insert size for<br />
partial cuts<br />
Insert<br />
seating Insert seating Insert seating<br />
�<br />
� = 90°<br />
�<br />
� = 90°<br />
�<br />
� = 90°<br />
Twin Cutter<br />
Assembly parts Accessories Assembly parts<br />
Tool<br />
(basic body<br />
+ pair of<br />
holders) ABS<br />
Holder Insert seating 1 Insert seating 2 Insert seating � Insert seating � Insert seating � Axial adjustment<br />
pin 6<br />
�=90° �=80° �=90° �=90° �=90°<br />
Threaded<br />
pin 7<br />
DIN913<br />
X D Order No. X d X d1 L Order No. Order No. Order No. Order No. Order No. Order No. Order No. Order No.<br />
min-max<br />
appropriate insert appropriate insert appropriate insert appropriate insert appropriate insert Article<br />
196–271<br />
G01 63531<br />
9,15<br />
261–335<br />
G01 63541<br />
11,04<br />
326–401<br />
G01 63551<br />
13,94<br />
100<br />
100<br />
100<br />
165<br />
230<br />
295<br />
88<br />
88<br />
88<br />
G03 10281<br />
1,335<br />
G03 10291<br />
1,733<br />
G03 10301<br />
1,983<br />
D54 60070 D54 60170 D54 60570 D54 60470<br />
0,049 0,049 0,062 0,055<br />
W29 58... W29 58... W29 24... C85 44...<br />
D54 60370<br />
0,056<br />
55051 05020<br />
G03 10281.13<br />
W30<br />
M5×20<br />
44...<br />
Features:<br />
• The 90° design has radially arranged cutters and can therefore be operated with the same cutting edge overhang with<br />
double feed rate (feed distribution).<br />
• The 80° design offers greater cutting widths through arrow-shaped cutter arrangement and particularly good tool<br />
guidance. Connection, excluding extensions, where possible only directly onto taper shank or spindle adaptor flange.<br />
• The tool has internal coolant supply to each cutter.<br />
Patent applied for inside and outside Germany (ABS)