SFIGMOMANOMETRO DA POLSO AUTOMATICO ... - PiC solution

C. Correct Posture
D. Press Key
E. Automatic Memory
Rest your elbow on a flat surface so that your wrist is at the same height
as your heart
Remain still during measurement
The symbol “M” will blink when measurement is completed and stored
in memory.
mem ok mem AVG
F. Recall Memory
Use User-Switching Key to select a memory zone, then press M key to
recall prior measured values from that memory zone.
Preliminary remarks
This Blood Pressure Monitor complies with the European regulations and bears the CE mark “CE 0068”.
The quality of the device has been verified and conforms to the directive 93/42/CEE:
EN 1060-1: 1995/A1: 2002 Non-invasive sphygmomanometers - Part 1 General requirements
EN 1060-3: 1997/A1: 2005 Non-invasive sphygmomanometers - Part 2 Supplementary requirements
for electromechanical blood pressure measuring systems
EN 1060-4: 2004 Non-invasive sphygmomanometers - Part 4 Test Procedures to determine
the overall system accuracy of automated non-invasive sphygmomanometers.
To ensure continued accuracy, it is recommended that all digital blood pressure monitors are re-calibrated.
This monitor does not require re-calibration for 2 years under normal usage approximately 3 times a day,
20