SFIGMOMANOMETRO DA POLSO AUTOMATICO ... - PiC solution

Installing the batteries
1. With the thumb on the battery cover, press in the direction indicated
to open.
2. First insert the lower battery. Battery type: LRO3 (AAA) 2 alkaline
3. Insert the second battery.
4. Close the cover by placing the tabs in the holes of the battery compartment.
Push in the other end to close the cover completely.
5. Replace the batteries in pairs. After replacing the batteries and before
each measurement ensure that the cover is properly closed.
6. When the batteries are removed, all memories are cancelled
You need to replace the batteries when:
1. low battery indicator appears on display.
2. the ON/OFF/START key is pressed and nothing appears on display.
Replace the batteries in pairs.
Remove the batteries from the device if it is not used for a long time.
Warning:
1. For instructions on battery disposal please refer to page 33.
2. There are no user serviceable parts inside. Batteries or damage from old batteries is not
covered by warranty.
3. Only use brand batteries. Always replace with new batteries together. Use batteries of the
same brand and same type. Other types of batteries can cause explosions or fires.
4. The battery can explode if handled carelessly. Never replace, remove or insert batteries near
heat sources. Do not burn.
5. Rechargeable batteries are not recommended
24