CONTRACT FURNITURE - STUA

TECHNICAL INFORMATION
Polipropileno:
Blanco
translúcido
Visón
Negro
Tapicerías
Kvadrat:
Divina Melange 120
Divina Melange 170
59 cm - 23.2"
La silla Gas con ruedas siempre lleva brazos
Gas with castors has always arms
Polypropylene:
Translucent
white
Taupe
Black
Fabrics from
Kvadrat:
La silla Gas puede ser tapizada
con cualquiera de las telas
Kvadrat Divina Melange.
Puede consultar los colores disponibles
en el muestrario de
acabados de la butaca Nube
(pág. 18)
Gas chair can be upholstered in
any of the Divina Melange fabrics
from the Nube armchair collection.
You can see the whole STUA
assortment of Divina Melange
in the technical page of Nube,
page 18.
Red:
Red blanca
Red visón
Red negra
Pieles:
Piedra
Cognac
Marrón
Negra
Ecopiel
sintética:
Arena
Visón
Cognac
Marrón
Negra
85 cm - 33.5"
76 cm - 30"
71 cm - 28"
62 cm - 24.5"
52 cm - 20.4"
43 cm - 17"
Mesh:
White mesh
Taupe mesh
Black mesh
Leather colours:
Stone
Cognac
Brown
Black
Synthetic
ecoleather:
Sand
Taupe
Cognac
Brown
Black
FRAME
The frame is made of injection &
extruded aluminium. The chrome
has a glossy or matt finish.
DETAILS
Attention to details can be seen
in every part of the chair. Every
joint, angle and curve of Gas has
been designed to look beautiful
from any angle, a flawless finish,
even under the seat.
SEAT & BACK OPTIONS
The versatility of the Gas chair
is evident with the possibility of
combining different materials for
the seat and back, as they all
work well together and provide
great solutions.
The options are:
- Polypropylene
- Upholstrered in fabric or leather
- Leather with or without inner
foam
- Polyester textile mesh
GAS SIDE CHAIR
GLIDERS
Attention to detail is evident in
the aluminium coloured plastic
gliders of the Gas chair.
The gliders are designed to have
a high level of surface contact
with the floor, which aids fo
movement as well as minimising
scuffing.
Felt gliders are also available for
wooden floors.
TRIVALENT CHROME
All the STUA chromings are trivalent,
the most ecological of the
chome in our own premises with
the highest quality standards
and a total respect for the enviroment.
INDOOR USE
Stainless steel screws are used
in the construction of Gas, however,
it is a chair for indoor use
only.
Most parts & elements of the
Gas chair are recyclable, and
ecological production processes
are employed.
UPHOLSTERED UNDER THE SEAT
The upholstered version of Gas
has a layer of fireproof foam on
the underside of the seat, so
when stacking the chairs, it does
not cause any damage to the
upholstered chair below.
Another feature of this foam is
also its noise reduction characteristic.
LINKING SYSTEM FOR GAS
A linking device, made of grey
polypropelene, is available to
join the Gas chairs.
Its form reflects the organic
shape of the chair. Any Gas
chair can have a linking device
attached to it. The device is
available for both chairs, with or
without armrests.
STACKING
The Gas chair comes
with or without
armrests and both
options are stackable.
Gas can be stacked
on a trolley up to 20
units.
And on the floor 8
units can be stacked.
ERGONOMICS
The backrest has an exceptional
ergonomic shape and provides
great lumbar support, as it
curves around the back of the
user.
COMFORT
The shape and curves of the seat
are extremely comfortable for
the user and no hard angles or
corners break this fluidity of line.
MESH
The most spectacular finish for
the Gas chair is in the mesh version.
A material of the future.
The polyester mesh is available
in white, taupe or black. The
material adapts to the contours
of the user and allows the skin
to breathe.
Several combinations of Gas seat
& back are possible: back rest
in mesh with either mesh, polypropylene
or leather upholstered
seats.
TROLLEY FOR GAS CHAIR
The trolley for Gas is made
in grey powder-coated steel
tubes with four castors - two
with brakes.
Each trolley can hold up to 20
chairs, either with or without
armrests.
102 cm
40"
72 cm
28.3"
32 cm
12.6"
DIFFERENT VERSIONS WEIGHT:
FINISHES
Mesh
Plastic
Upholstered
Ecoleather
Leather
without
arms
2.9 kg
6.5 lbs
3.6 kg
8 lbs
4.2 kg
9.4 lbs
4.3 kg
9.5 lbs
4.3 kg
9.5 lbs
with
arms
3.5 kg
7.8 lbs
4.2 kg
9.3 lbs
4.8 kg
10.7 lbs
4.9 kg
10.8 lbs
4.9 kg
10.8 lbs
CERTIFICATE
The Gas chair has been awarded
the GS (German Standards) certificate
given by the TüV Rheinland.
This is the most stringent
quality certificate that a chair
can attain, ensuring that the
design is extremely durable in
heavy public use. Only a handful
of chair designs have been
awarded this certificate. The certificate
applies to both versions,
with and without armrests.
The chair was tested according to:
EN 1335-1: 2000
EN 1335-3: 2000
EN 1728: 2000
DIN 68878 - 1/01.87
EN 1022: 1996
Certificate number: S 9310570
GAS TASK CHAIR
with
castors
7 kg
15.4 lbs
7.7 kg
17 lbs
8.3 kg
18.3 lbs
8.4 kg
18.5 lbs
8.4 kg
18.5 lbs
The Gas task chair has a ver light
base made of injection aluminium
designed by Jesus Gasca.
The chair is height adjustable
and the stem allows the chair to
swivel.
There is an elegant aluminium
beam under the seat, that allows
a the design to look light.
The Gas task chair does always
have aluminium arms.
stua 83