Manual de la Soft-Starter SS W-04 Manual de la Soft ... - Dimotec
Manual de la Soft-Starter SS W-04 Manual de la Soft ... - Dimotec
Manual de la Soft-Starter SS W-04 Manual de la Soft ... - Dimotec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6<br />
DESCRIPCION DETALLADA DE LOS PARAMETROS<br />
6.2.9 - P82 - Estado <strong>de</strong> <strong>la</strong><br />
protección térmica<br />
<strong>de</strong>l motor<br />
Indica el estado <strong>de</strong> <strong>la</strong> protección térmica <strong>de</strong>l motor<br />
en esca<strong>la</strong>r porcentual (0...250%), siendo que 250%<br />
es el punto <strong>de</strong> actuación <strong>de</strong> <strong>la</strong> protección térmica<br />
<strong>de</strong>l motor, indicando E<strong>04</strong>.<br />
6.2.10 -4 últimos errores P96 - Último error <strong>de</strong> hardware ocurrido<br />
P97 - Penúltimo error <strong>de</strong> hardware ocurrido<br />
P98 - Antepenúltimo error <strong>de</strong> hardware ocurrido<br />
P99 - 1º <strong>de</strong> los últimos 4 errores <strong>de</strong> hardware<br />
ocurridos<br />
Indican respectivamente el último, penúltimo,<br />
antepenúltimo y 1º <strong>de</strong> los cuatro últimos errores<br />
ocurridos.<br />
Sistemática <strong>de</strong> registro:<br />
EXX P96 P97 P98 P99 el contenido<br />
anterior <strong>de</strong> P99 es perdido.<br />
6.3 PARAMETROS DE REGULACION - P00... P15, P22... P42, P45, P47<br />
6.3.1 - P00-Parámetro<br />
<strong>de</strong> acceso<br />
<br />
Libera el acceso para alteración <strong>de</strong> los parámetros.<br />
P00<br />
OFF<br />
ON<br />
ACCESO<br />
Lectura <strong>de</strong> los parámetros<br />
Alteración <strong>de</strong> los parámetros<br />
6.3.2 - P01- Tensión inicial<br />
(% UN)<br />
Ajusta el valor inicial <strong>de</strong> tensión (% ) que será<br />
aplicado al motor conforme figura 6.1.<br />
<br />
Este parámetro <strong>de</strong>be ser ajustado para el mínimo<br />
valor que consiga girar el motor.<br />
Padrón<br />
mín. Rango máx. Fábrica<br />
menor paso<br />
P01 - Tensión Inicial 25%UN 1% 90%UN 30<br />
49