Reverb Stealth Height Adjust Seatpost User Manual - YT Industries

English14Bleed the remoteBefore operating the Reverb Stealth, you must bleed the remote.Please visit www.sram.com/en/service for Reverb remote bleed instructions.Reverb Stealth User ManualReverb Stealth User Manual17safety checkCheck that the seatpost does not slip in the frame. Check that the saddle does not slipon the seatpost clamp.English15Raise and lower the saddleBefore riding your bike, sit on your bike while it is stationary and cycle the seatpostthrough its travel a couple of times. To lower the seatpost completely, press and hold theactuator; your body weight will compress the seatpost. To raise the seatpost, unweightthe saddle then press and release the actuator.maintenanceWhen the post sits for a prolonged period of time without movement, it may develop a slightincrease in breakaway friction. This is normal and will cease once the seatpost is cycled.If the breakaway is excessive or does not cease once seatpost is cycled, cleaning andlubrication of the seatpost may be required.You can adjust the height of the seatpost to any point in its travel by releasing theactuator while the seatpost is at the desired height.It is possible to manually raise the seatpost without actuating the remote by pulling up on thesaddle with enough force.16Adjust the speed of the seatpostTurn the speed adjuster on the remote counter-clockwise todecrease the speed of the saddle height change or clockwiseto increase the speed of the saddle height change.12 95-4215-004-000 Rev ACopyright © 2011 SRAM, LLC13