Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Parts<br />
Foil Connector<br />
Wedges<br />
Foil Screws<br />
Allen Wrenches<br />
Instant<br />
Adhesive<br />
Miscellaneous Parts<br />
Prefeeder<br />
Top Foil<br />
Blue Loctite ® Red Loctite ® Trim Cap<br />
Torque Tube<br />
Spare<br />
Screws<br />
Screws<br />
Plastic Split<br />
Locking<br />
Cylinder<br />
Collar<br />
Bottom<br />
Connector<br />
Regular Connectors<br />
1 Bag of 17 Connector Wedges, 3 Extra Wedges<br />
1 Prefeeder with line<br />
1 Bag of 30 Foil Screws. Contains 6 extra screws<br />
1 Bag of three Torque Tube Screws<br />
1 Bag of Spare Screws. Contains one spare screw<br />
for every application. They are not required for<br />
installation<br />
1 4 mm Allen Wrench<br />
1 5 mm Allen Wrench<br />
1 6 mm Allen Wrench<br />
1 Locking Collar<br />
1 Locking Split Cylinder - Used only with swage<br />
terminals - Norseman ® , Sta-Lok ® . Rod installations<br />
do not use this part<br />
1 Instant Adhesive<br />
1 Loctite ® (Blue)<br />
1 Loctite ® (Red)<br />
1 Feeder with Screw<br />
Rigger Components<br />
These parts are placed on the headstay before assembly<br />
and may be "missing" as the parts may have been placed<br />
on your headstay in advance.<br />
1 Top Foil Trim Cap<br />
1 8 7 /8" (225 mm) Bottom Connector<br />
6 7" (178 mm) Regular Connectors<br />
If your headstay is longer than 46'4" (14.122 m)<br />
you will need one more connector - Order part 810<br />
IMPORTANT<br />
Note: threaded headstay stud is sold separately.<br />
Be sure that you have ordered the correct size for<br />
your boat.<br />
Packed loose in the box<br />
1 Furling Line<br />
70' (21.3 m ) of 5 /16"<br />
(8 mm) Dacron braid<br />
1 Owner's Package<br />
Contains the instruction manual, warranty card<br />
and other information<br />
March 2003 Unit 1 MKIII 5