F11N F13N - Belmet

1. LABEL
Five adhesive labels are supplied with your multimeter clamp.
Choose the label in your language and, above all, do not
forget to stick it on the back of the clamp.
This label contains a reminder of the main functions of your
clamp and the maximum values which should not be
exceeded.
2. PRESENTATION
The F11N and F13N multimeter clamps have 4,000
measurement points with automatic calibre selection.
These correspond to the inspection and maintenance
requirements on all types of low-voltage electrical equipment.
Their perfect ergonomics mean that these instruments are
very simple to use.
They directly measure AC intensities, without opening the
circuit, in total safety :
■
■
The F11N only for sinusoidal voltages and currents.
The F13N gives the RMS value for any distorted or
sinusoidal current and voltage.
Their common functions :
- AC currents up to 700 A,
- DC and AC voltages up to 600 V,
- max value of current and voltage,
- resistances up to 4 kW ,
- continuity sound test,
- diode test,
- memory.
The specific function of the F13N :
- frequencies up to 4kHz.
Designed for professionals, these clamps meet the strictest
safety criteria and international standards, particularly:
- IEC 1010-1 and IEC 1010-2-032.
See Chapter 12: General characteristics
16