Curriculum vitae - Université de Genève

INITIAL INSTALLATION4.Secure mounting bracket (C) to outlet box usingscrews, spring washers, and flat washersprovided with the outlet box.*NOTE: It is very important that you use theproper hardware when installing the mountingbracket (C) as this will support the fan.4IMPORTANT: If using the angle mount, makesure open end of mounting bracket (C) is installedfacing the higher point of the ceiling.C5. Remove motor screws (I) and lock washers (K)from underside of motor. [If there are plasticmotor blocks installed with the motor screws (I)and lock washers (K), discard the plastic motorblocks.]5IFollow mounting instructions on pages 7- 9 for“Downrod Style Fan Mounting” or proceed topages 9 and 10 for “Closemount Style FanMounting”, depending on mounting method (A orB) chosen in Step 2 on previous page.KDOWNROD STYLE FAN MOUNTING1.Remove pin (M) and clip (N) from motor housingyoke at top of motor housing (D) and partially loosenset screws.1NSetScrew*Helpful Hint: Downrod style mounting is bestsuited for ceilings 8 ft. (2.44 m) high or higher. Fortaller ceilings you may want to use a longer downrod(not included) than the one provided. Angle stylemounting is best suited for angled or vaultedceilings. A longer downrod is sometimes necessaryto ensure proper blade clearance.DM7Lowes.com/harborbreeze