SupraMatic E P 9 Notice - Hormann.fr

ENGLISH5.2.4 Force limit in the CLOSE direction (see figure 29)In menu 6 the automatic force limit for closing thedoor can be altered in the sensitive setting. This is onlynecessary for doors which run extremely unevenly. Anunnecessarily high setting should not be selected.If the closing force is set too high, this can resultin damage to property or injury to persons. In thecase of extremely smooth-running doors, a lower settingcan be selected if the sensitivity to obstructions is to beincreased.Switch to menu 0 by pressing the PRG button.5.2.5 Door behaviour before/at the CLOSE travel limit(see figure 30)In menu 7 the automatic belt relief and the brakingbehaviour at the CLOSE travel limit can be influenced:Display “Soft“ stop Relief0 long automatic1 long without2 long short3 * short automatic4 short without5 short short6 without automatic7 without without8 without shortSwitch to menu 0 by pressing the PRG button.NoteFor up-and-over doors we recommend setting the “soft“stop at long.5.2.6 Force limit in the OPEN travel direction (see figure 31)In menu 8 the automatic power limit for opening thedoor can be altered in the sensitive setting. This is onlynecessary for doors which run extremely unevenly.An unnecessarily high setting should not be selected.If the opening force is set too high, this canresult in damage to property or injury to persons.In the case of extremely smooth-running doors, a lowersetting can be selected if the sensitivity to obstructionsis to be increased.Switch to menu 0 by pressing the PRG button.5.2.7 Door behaviour before/at the OPEN travel limit(see figure 32)In menu 9 the automatic belt relief and the braking behaviourat the “OPEN“ travel limit can be influenced.Display “Soft“ stop Relief0 * long automatic1 long without2 long short3 short automatic4 short without5 short short6 without automatic7 without without8 without shortSwitch to menu 0 by pressing the PRG button.NoteFor up-and-over doors we recommend setting the “soft“stop at long.6 Trouble-shooting (see page 54)7 Terms and Conditions of the WarrantyGuarantee PeriodIn addition to the statutory guarantee provided by thedealer, we provide the following guarantee of parts fromthe date of purchase:a) 5 years on operator mechanics, motor and motorcontrolsb) 2 years on radio, impulse generators, accessoriesand special systemsThere is no guarantee on consumables (e.g. fuses,batteries, lighting devices).Claims made under the guarantee do not extend theguarantee period. Following the supply of replacementparts the guarantee period is six months; or at least,the remainder of the guarantee period.ConditionsA claim under this guarantee is only valid for the countryin which the equipment was bought. The product musthave been purchased through authorised distributionchannels. A claim under this guarantee exists only fordamage to the product in the contract itself. Reimbursementof expenditure for dismantling and installation,testing of corresponding parts, as well as demands forlost profits and compensation for damages, are excludedfrom the guarantee. The receipt of purchase substantiatesyour right to claim under the guarantee.Service renderedFor the duration of the guarantee we will eliminate allproduct defects that are proven to be attributable tomaterial or manufacturing faults. We pledge to providefree of charge and at our discretion to replace the defectiveparts with a non-defective one, to improve it, orto reimburse for a reduction in price.Excluded are damages due to:- improper fitting and connection- improper commissioning or operating- external influences, such as fire, water, abnormalweather conditions- mechanical damage due to accidents, dropping, jolting- negligent or deliberate destruction- normal wear and tear or deficient maintenance52 05.2004 TR10A011 RE