Samsung Moniteur 32'' LE32C Edge-LED usage intensif (LH32LECPLBC/EN ) - Manuel de l'utilisateur 5.98 MB, pdf, Anglais

PIP On/Off control
••
Function
The PIP mode of a product can be turned on or off using a PC.
――
Only available on models that have the PIP function.
――
The mode cannot be controlled if Video Wall is set to On.
――
This function is not available in MagicInfo.
••
Viewing PIP on/off state (Get the PIP ON / OFF Status)
Header Command ID Data length Checksum
0xAA 0x3C 0
Auto adjustment control (PC and BNC only)
••
Function
Automatically adjust the PC system screen using a PC.
••
Viewing auto adjustment state (Get Auto Adjustment Status)
None
••
Setting auto adjustment (Set Auto Adjustment)
Header Command ID Data length Data Checksum
0xAA 0x3D 1 "Auto
Adjustment"
••
Setting PIP on/off (Set the PIP ON / OFF)
Header Command ID Data length Data Checksum
0xAA 0x3C 1 "PIP"
"Auto Adjustment" : 0x00 (at all times)
••
Ack
Header Command ID Data
length
Ack/Nak r-CMD Val1 Checksum
"PIP": A code used to turn the PIP mode of a product on or off
1: PIP ON
0: PIP OFF
••
Ack
Header Command ID Data
length
Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 'A' 0x3C "PIP"
"PIP": A code used to turn the PIP mode of a product on or off
••
Nak
0xAA 0xFF 3 'A' 0x3D "Auto
Adjustment"
••
Nak
Header Command ID Data
length
Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 'A' 0x3D "ERR"
"ERR": A code showing what error has occurred
Header Command ID Data
length
Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 'A' 0x3C "PIP"
"ERR": A code showing what error has occurred
36