Samsung 23''Série7 Moniteur station d'accueil C23A750 (LC23A750XS/EN ) - Manuel de l'utilisateur 7.74 MB, pdf, Anglais
Samsung 23''Série7 Moniteur station d'accueil C23A750 (LC23A750XS/EN ) - Manuel de l'utilisateur 7.74 MB, pdf, Anglais
Samsung 23''Série7 Moniteur station d'accueil C23A750 (LC23A750XS/EN ) - Manuel de l'utilisateur 7.74 MB, pdf, Anglais
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7<br />
Setup and Reset<br />
7.1 HUB<br />
Configure the settings to use the HUB function on the product.<br />
• Refer to "2.1 About "HUB Monitor"" for <strong>de</strong>tails about how to use the HUB function.<br />
• To open the HUB settings screen, press HUB on the stand.<br />
7.1.1 Auto Wireless Detection<br />
If the product is connected to a PC via Wireless USB, it will automatically <strong>de</strong>tect the Wireless USB signal<br />
and change the input source to Wireless USB mo<strong>de</strong>.<br />
Configuring Auto Wireless Detection<br />
1 Press [ m ] on the product.<br />
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.<br />
3 Press [ ] to move to HUB and press [ ] on the product.<br />
4 Press [ ] to move to Auto Wireless Detection and press [ ] on the product. The following screen<br />
will appear.<br />
HUB<br />
Auto Wireless Detection<br />
Wireless Connection<br />
USB Connection<br />
Analog<br />
HDMI<br />
USB Super Charging<br />
Wireless ID<br />
Off<br />
On<br />
<br />
Disconnected<br />
Disconnected<br />
Disconnected<br />
<br />
<br />
Return<br />
Adjust<br />
Enter<br />
• Off: Deactivate the auto wireless <strong>de</strong>tection mo<strong>de</strong>.<br />
• On: Automatically <strong>de</strong>tect a Wireless USB signal and change the input source to Wireless USB<br />
mo<strong>de</strong>.<br />
5 Press [ ] to move to the option you want and press the [ ].<br />
6 The selected option will be applied.<br />
7.1.2 Wireless Connection<br />
You can view the status of the Wireless USB connection between the product and a PC.<br />
Select the Wireless Connection option. The input source will change to Wireless USB mo<strong>de</strong>.<br />
• The connection status will be shown even when the input source is not Wireless USB mo<strong>de</strong>.<br />
• Selecting Wireless Connection when a Wireless USB connection is established will change the<br />
input source to Wireless USB mo<strong>de</strong>.<br />
7 Setup and Reset<br />
67
Change language