DS0000GDR336 manual.pdf - E-milione E-milione
DS0000GDR336 manual.pdf - E-milione E-milione
DS0000GDR336 manual.pdf - E-milione E-milione
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Record playback<br />
Record playback<br />
Before starting listening to a record, follow these 2 steps:<br />
Figure F<br />
________________________<br />
Cartridge description<br />
Turntable description<br />
Figure G<br />
________________________<br />
Turntable description<br />
Listening to the record<br />
Figure G<br />
________________________<br />
Record playback<br />
26<br />
ENGLISH<br />
1. Remove the stylus protector.<br />
2. Be sure that the tone arm has being detached from the tone arm rest<br />
before operating and re-secured it again afterwards.<br />
31) Spindle adaptor.<br />
32) Tone arm lever (onnly model GDR 334/334DL)<br />
33) Speed selector (33-45-78 rpm).<br />
34) Pick-up holder.<br />
1. Select PHONO source.<br />
2. Select the speed of the record (45-33-78 rpm) using the RPM speed<br />
selector (33).<br />
3. Place the record on the turntable (use the spindle adaptor (31) if<br />
required).<br />
4. Lift the tone arm from the rest and slowly move it to the record side.<br />
The turntable will start to rotate.<br />
5. Place the tone arm to the desired position of the record.<br />
6. Adjust the volume to the desired level.<br />
7. At the end of the record, the turntable will automatically stop rotating.<br />
Lift the tone arm from the record and return it to the rest.<br />
8. To stop <strong>manual</strong>ly, lift the tone arm from the record and return it to the<br />
rest.<br />
Note: since for some kind of record the auto-stop area is out of the unit setting, it could happen<br />
that the record stops before the last track is finished. In this case, select the auto-stop switch to “<br />
OFF “ position, then it will run to the end of the record but won’t stop automatically (turn off the unit by<br />
power button or switch back the auto-stop switch to “ ON “ position to stop the turntable). Then put back<br />
the tone arm to the rest position.