REFERÊNCIA INDUSTRIAL PRINCIPAL Foto: Valterci Santos NA FV DE ARAÚJO SÃO PRODUZIDOS 50 MIL METROS LINEARES COM UMA SERRA, O QUE DÁ, EM MÉDIA, 24 HORAS DE TRABALHO COM A MESMA SERRA. HOJE A EMPRESA GASTA 3 MIL REAIS POR MÊS COM CUSTOS EM SERRA, ANTES GASTAVA DOIS MIL REAIS POR SEMANA EMPRESAS ADOTARAM A SERRA FITA COM DESIGN E USO DE METAIS MAIS RESISTENTES, AMPLIARAM A PRODUTIVIDADE E MELHORARAM O ACABAMENTO FINAL DO PRODUTO 36 | www.referenciaindustrial.com.br
MOLDURAS APÓS PASSAR PELA SERRA FITA Foto: Valterci Santos que usávamos anteriormente, porém em valores, pagamos três vezes mais por esta serra, entretanto o custo-benefício justifica”, analisa. Receio foi a palavra que o diretor de filial de Tunas (PR) da FV de Araújo, Adhmar Vieira de Araújo Neto utilizou para descrever o momento em que resolveu investir e trocar de serra fita. “Tínhamos receio, pois quando adquirimos achávamos que ela não daria conta. Usávamos uma serra convencional, que possuía os dentes mais espaçados”, lembra. Mas o produto o surpreendeu de forma positiva. “Foi a solução da lavoura”, brinca. “Conseguimos colocá-la na nossa máquina, e ela dura muito mais, nós não a afiamos, não precisamos fazer nada, e tocamos quase que uma semana com a mesma serra, ela é fantástica.” José Paulo, gerente da FV de Araújo, comenta que as serras que a empresa trabalhava antes eram utilizadas entre quatro, oito e até 16 horas. “A partir do momentos que começamos a usar esta, já tivemos vezes que usamos cinco dias, oito horas por dia direto, basicamente 40 horas sem trocar de serra”, impressiona-se. Assim como nas outras empresas citadas, não foi preciso fazer adaptações nas máquinas, a serra já vem pronta para uso. Diego Ricardo Vieira, representante da WS Serras para o Segmento de Madeira e gerente comercial da DRV, explica que a melhora saw blade brand. “We had some doubts as to acquiring a new brand’s blade because we thought it couldn't handle the job. We had been using a saw blade that had more spaced teeth,” he says. But the product surprised in a positive way. “It was a solution for the crop,” he jokes. “We can put it on our machine, and it lasts much longer, we don’t need to sharpen it, we don't even have to do anything, and we work for almost a week with the same saw blade, it's amazing.” José Paulo, Manager for FV de Araújo, comments that the saw blades that the Company used to work with before were used for four, eight or 16 hours. “From the moment we started using this blade, at times it lasted five days, eight hours per day, basically 40 hours without replacement,” he says, impressed. Thus as in other companies, it wasn’t necessary to make any equipment adjustments, the saw blade comes ready for use. Diego Ricardo Vieira, WS Serras dealer for wood working sector and sales manager at DRV, explains that the product is constantly being improved. “We try to provide what the market needs and every day we work to improve the saw blade.” Cristiano Nicolau, Production Supervisor at FV de Araújo, worked in other companies and didn't know about this saw blade. “The finish provided by the saw blade is better; in the MARÇO | 37