CrossDisplay-Switching Config Tool - Guntermann und Drunck GmbH

Administrating configurations
Loading or saving configurations
You can save a configuration that you created with the software on a local drive to
reload them later.
How to save configurations on a local drive:
1. In the menu bar, click File > Save as... or
click the icon in the toolbar.
2. In the file dialog, select the file location and enter the file name.
NOTE: If you load the configuration from a local drive, or if you already saved the
configuration during a session, you can save the configuration by using
File > Save or the icon in the toolbar.
When using this function, the existing file is overwritten.
3. Click Open.
How to load existing configurations on a local drive:
1. In the menu bar, click File > Open or
click the icon in the toolbar.
2. In the file dialog, select the file location and select the file.
3. Click Open.
Printing the workspace
You can print the workspace including the current monitor order and ratio.
How to print the current workspace:
1. In the menu bar, click File > Print or
click the icon in the toolbar.
2. Select the printer and the settings.
3. Click Print.
11 · CrossDisplay-Switching Config Tool