Ditec Smart Plus - DITEC ENTREMATIC

Weitere Magazine

Empfehlungen

Info

CONTENTSChap.Topic ...................................................................................................................................... Page1. GENERAL SAFETY PRECAUTIONS ........................................................................................ 282. TECHNICAL CHARACTERISTICS ............................................................................................ 293. MECHANICAL INSTALLATION3.1 Checking the passage opening.............................................................................................. 303.2 Fixing the uprights.................................................................................................................. 303.3 Assembling the crosspiece.................................................................................................... 303.4 Assembling the gearmotor..................................................................................................... 303.5 Installing the photocells.......................................................................................................... 303.6 Installing the safety edge (when necessary).......................................................................... 303.7 Fixing the cable chain to the safety edge............................................................................... 304. Electric connections4.1 Control panel.......................................................................................................................... 314.2 Connecting the control panel / automation............................................................................ 314.3 Safety photocells.................................................................................................................... 315. ELECTRONIC CONTROL PANEL5.1 48E - connections.................................................................................................................. 325.2 49E - connections.................................................................................................................. 365.3 47E (inverter) - connections................................................................................................... 386. Adjusting and starting6.1 Adjustment of the safety device DSC (photocells in the crosspiece)..................................... 426.2 Tensioning adjustment of the curtain..................................................................................... 427. TROUBLESHOOTING ............................................................................................................... 438. MAINTENANCE ......................................................................................................................... 441. GENERAL SAFETY PRECAUTIONSThis installation manual is intended for professionally competent personnel only.The installation, the electrical connections and the settings must be completed in conformity with good workmanshipand with the laws in force.Read the instructions carefully before beginning to install the product. Incorrect installation may be a source of danger.Packaging materials (plastics, polystyrene, etc) must not be allowed to litter the environment and must be kept out of thereach of children for whom they may be a source of danger.Before beginning the installation check that the product is in perfect condition.Do not install the product in explosive areas and atmospheres: the presence of flammable gas or fumes represents a seriousthreat to safety.Before installing the door, make all the structural modifications necessary in order to create safety clerance and to guardor isolate all the compression, shearing, trapping and general danger areas.Check that the existing structure has the necessary strength and stability.The safety devices must protect against compression, shearing, trapping and general danger areas of the motorized door.Display the signs required by law to identify danger areas.Each installation must bear a visible indication of the data identifying the motorised door.Before connecting to the mains check that the rating is correct for the destination power requirements.A multipolar isolation switch with minimum contact gaps of 3 mm must be included in the mains supply.Check that upstream of the electrical installation there is an adequate differential switch and a suitable circuit breaker.Ensure that the motorised door has an earth terminal in acwireance with the safety adjustements in force.The manufacturer of the door declines all responsability in cases where components which are incompatible with the safeand correct operation of the product only original spare parts must be used.For repairs or replacements of products only <strong>Ditec</strong> Entrematic original spare parts must be used.The fitter must supply all information corcerning the automatic, the manual and emergency operation of the motorised dooror gate, and must provide the user the device with the operating instructions.Optional accessoryCSafety ConfortTSafety TopAll right reservedAll data and specifications have been drawn up and checked with the greatest care. The manufacturer cannot however takeany responsibility for eventual errors, ommisions or incomplete data due to technical or illustrative purposes.0DT826 2013-07-01- 28 -
4 1EN103211159148161312765Ref. Description1 Side heads2 Box3 Box cover4 Winding shaft5 Safety edge6 Column7 Column cover8 SealRef. Description9 Gearmotor K22 / K2610 Manual operation device11 Manual operation rod12 Control panel13 Photocell LAB414 Aluminium profile15 Polyester curtain16 Transparent PVC curtain2. TECHNICAL CHARACTERISTICSCONTROL PANEL TRIPHASE (48E)(49E)Power supply voltage ..........................400 V, 50/60 HzPower input ............................................................. 6 AAuxillary control power voltage.........................24VMotor rating....................................................0,75 KWControl board protection class............................. IP 55Operating temperature............................... - 5 + 50 °CCONTROL PANEL INVERTER (47E)Power supply voltage ......... 230 V monofase 50/60 HzPower input ........................................................... 10 AAuxillary control power voltage.........................24VMotor rating....................................................0,75 KWControl board protection class............................. IP 55Operating temperature............................... - 5 + 50 °C- 29 - 0DT826 2013-07-01
Seite 1 und 2: Ditec Smart PlusHandbuch die montag
Seite 3 und 4: 4 1DE103211159148161312765Rif. Besc
Seite 5 und 6: 4. ELEKTRISCHE ANSCHLÜSSEDE4.1 Ele
Seite 7 und 8: 48EDEBraunK22WeißSchwarzBlau170121
Seite 9 und 10: 48EDEEL07L0000000000000www.ditec.it
Seite 11 und 12: DEBraunWeißSchwarzBlau1712110BACEn
Seite 13 und 14: K22 inv YBraun12BEndschalterVerzög
Seite 15 und 16: 47EDie Drahtbrücke J2 am Tor Ditec
Seite 17 und 18: 7. STÖRUNGSSUCHEDANGERBevor Arbeit
Seite 19 und 20: BedienungshandbuchDEALLGEMEINE SICH
Seite 21 und 22: HINWEISE ZUM GEBRAUCHDEServiceklass
Seite 23 und 24: BAUTEILLISTEDEBezug Beschreibung Me
Seite 25 und 26: MECHANICAL INSTALLATION DRAWINGS2 3
Seite 27: - 27 - 0DT826 2013-07-01
Seite 31 und 32: 4. Electric connectionsEN4.1 Contro
Seite 33 und 34: 48EENBrownK22WhiteBlackBlue17012110
Seite 35 und 36: 48EENEL07L0000000000000www.ditec.it
Seite 37 und 38: ENBrownWhiteBlackBlue1712110BACOpen
Seite 39 und 40: K22 inv YBrown12BSlowdown limitswit
Seite 41 und 42: 47EAlways cut the jumper J2 on door
Seite 43 und 44: 7. TROUBLESHOOTINGENDANGERWARNINGWh
Seite 45 und 46: USE INSTRUCTIONSENGENERAL SAFETY PR
Seite 47 und 48: APPLICATIONSENUse: 4 (minimum 5 yea

Ditec Smart Plus - DITEC ENTREMATIC

Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.

Template löschen?

Als Template speichern?