Ditec Smart Plus - DITEC ENTREMATIC

48EENEL07L0000000000000www.ditec.itFUSEF4ONCOM1394LDVLDR20PRGJ7SO EORP TC ONONU W VEL07PW20000000000000- LK +1 2 3 4 5 611 12 17 IN SA POWERNIO17 14 12 11 0 0 0 1 1 2 3 4 6 8 9 20 41YZXF5L3 L2 L1FUSESID Value Dimension CircuitF1F2F3F1 - F2 - F3 8A - 500V 10.3 x 38 Three phase lineF4 3.15A - 230V 5 x 20 TransformerF5 2.5A - 500V 5 x 30 Dynamic brake + BrakeADJUSTment limit switch1. Activate the door by pressing the appropriate buttons, and check it movesin the correct direction and If necessary, reverse the movement directionby modifying the phase sequence, adjusting the line wires upstream ofthe main switch.CA2. Carry the curtain in the closed position.3. By means of a screwdriver, turn the “C” cam until the relative microswitchis triggered.A4. Carry out the same procedure for the opening limit switch: bring thecurtain to the open door position, and adjust cam “A”.5. Activate the automation to check the calibration and, if necessary, makea further adjustment.C- 35 - 0DT826 2013-07-01