Montage- und Bedienungsanleitung Funk-Wandthermostat ... - ELV

7 Operation
7.1 Overview
The heating controller has three modes in stand-alone operation
(operation without a HomeMatic center), automatic mode,
manual mode and vacation/party mode. If the heating controller
is linked to a HomeMatic center, central operation is also possible.
You can switch between the individual modes of operation with
the menu button.
The various modes can be called up by repeatedly pressing the
button.The display background lighting (if activated) is always
switched on if a button or the setting dial is actuated, the time for
illumination can be adjusted.
The current time, date and the actual temperature alternating
with the relative humidity are shown on the display as default.
You can also select a display mode whereas the set temperature
and the relative humidity will alternate on the display however.
Use the OK button to show the hidden temperature (set temperature
or actual temperature).
As soon as a HomeMatic component is taught, the antenna symbol
indicating existing radio reception appears.
The display of the room thermostats show all warnings "Low-
Bat" (low battery) of the taught components and the thermostats
themselves. These messages are indicated with the battery
symbol and
• S for a sensor (shutter contact, window rotary handle sensor)
• V for an actuator
41