Montage- und Bedienungsanleitung Funk-Wandthermostat ... - ELV

The respective device can be found easily through the "Special
functions" menu "VST" or "WST".
If only the battery symbol appears, the messages applies only to
the room thermostats.
7.2 Operating modes
7.2.1 Automatic mode
The room temperature follows the defined weekday program in
automatic mode (display "Auto"). The temperature changes for
the current weekday are shown on the bar-scale in the lower
display margin. The bar is always shown if the temperature is
greater or equal to the comfort temperature.
If the temperature should be changed temporarily, the setting
dial can be used. The thermostat will automatically return to the
time-controlled program again at the next regular temperature
change in the time program.
7.2.2 Manual mode
The functionality of the controller in manual mode (display
"Manu") corresponds with that of a conventional thermostat.
The controller remains at the set temperature at all times in
manual mode. Automatic time-controlled changes do not occur.
There are also no reactions to sensors indicating an open
window.
7.2.3 Vacation-/Party function
The temperature remains at a fixed temperature value for a
defined time-period (e.g. for the duration of a party or a vacation)
in this operating mode (suitcase symbol on display). The controller
then automatically changes to automatic mode or to center
station operation. Changing to the center station operation is always
done if the controller was in center station operation before
vacation/party mode and vacation/party mode was activated
from the center.
42