Montage- und Bedienungsanleitung Funk-Wandthermostat ... - ELV
Montage- und Bedienungsanleitung Funk-Wandthermostat ... - ELV
Montage- und Bedienungsanleitung Funk-Wandthermostat ... - ELV
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
8.13 Setting the position for errors on the actuator<br />
"EPO"<br />
If the batteries of the valve drive are low or if the communication<br />
to the heating controller is erroneous, the valve drive moves to<br />
the defined error position and remains in this position until the<br />
error is rectified.<br />
This position can be set for each valve drive individually with<br />
special function "EPO".<br />
Call up special function "EPO" and confirm with the "OK" button.<br />
Use the setting dial to select the desired valve drive and confirm<br />
with the "OK" button. Use the setting dial to choose the desired<br />
position that should be attained in case of an error (0-99%).<br />
Confirm the entry with the "OK" button.<br />
8.14 Resetting to factory status"RES"<br />
This special function can be used to reset the heating controller<br />
to factory status. Call up special function "RES" and confirm with<br />
the "OK" button.<br />
The device is reset to its factory setting. The start up is then<br />
performed as described in chapter "Start up".<br />
56
Change language