FLAIL MOWERS PRE-OPERATION Inspection - McConnel

DETACHMENT & STORAGE
DETACHING THE MACHINE
• Removal of the machine should be perfo rmed on a firm level s ite. The procedure for
detachment is as follows:
• Gently lower the machine fully to the ground.
• Switch off the tractor and remove its starting key.
• Remove the PTO driveshaft.
• ‘Chock’ the rear roller to prevent move ment of the machine during the detachment
procedure and whilst in storage.
• Detach hydraulic hoses where applicable.
• Remove the top link and both pins from the lower attachment points.
• Carefully and slowly drive the tractor clear of the machine.
• Clean and lubricate the machine in preparation for next use.
STORAGE
For extended periods of storage it is advisable that the ma chine be kept in a clean dry
environment protected from the elements to av oid risk of corrosion. The m achine should
be thoroughly cleaned and lubricated prior to stor age. At this point it is good practice to
check the machine for worn or damaged c omponents - any parts that require replacing
should be ordered and fitted at the earliest opportunity so the machine is fully prepared for
the next seasons work.
15