Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ISO 9001 CERTIFIED www.liteputer.com.tw<br />
2-10 Overload Protection<br />
If the total current is between 22A-35A, the device will limit output to 20A.<br />
The LED will display as below,<br />
F L – 2 0 A<br />
FL stands for the dimming value and it can be any value. Because of the different fixture,<br />
in some condition when the dimming value is 50%, the total current will be 15A but when<br />
the dimming value is 20% , the total current can be 25A.<br />
If the total current is over 35A, the device will switch off automatically.<br />
For example, when the total current is 37A, the LED will display as below.<br />
O. F. F. 3 7 A<br />
2-11 Memory Initialization<br />
Press【FUNC】and【ENTER】at the same time to initialize the device after turning off<br />
the device. Then turn the device on and LED will display,<br />
I n I t - -<br />
12<br />
Current load value<br />
<strong>Lite</strong>-<strong>Puter</strong><br />
<strong>DX</strong>-<strong>120</strong> [EUM-F]