2012 | FULL-LINE CATALOG - Miller

1&3-Ph 1-Phase
Cutting w/Engine Drives
68
Product
Guide Page
Spectrum® 125C 69
Spectrum® 375 69
Spectrum® 375 70
X-TREME Spectrum® 625 70
X-TREME Spectrum® 875 71
Spectrum® 875 71
Auto-Line
Class
Gouging
Piercing
Rated Output/ Mild Stainless
Duty Cycle Steel Steel Aluminum Special Features Typical Applications
12 A at 35% 1/8 in. 1/8 in. 1/16 in. Built-in air compressor HVAC, hobbyist, auto body, plumbing
27 A at 35% 3/8 in. 3/8 in. 1/4 in. 115/230 V dual input voltage, new XT30C torch Hobbyist, auto restoration, fabrication
30 A at 35% 3/8 in. 3/8 in. 1/4 in. Auto-Line: 115–230 V, MVP plugs, only 19 lb., HVAC, maintenance, construction
Auto-Refire, new XT30 torch
40 A at 50% 5/8 in. 1/2 in. 3/8 in. Auto-Line: 115 – 230 V, MVP adapters, only 21 lb., Maintenance, light construction,
Auto-Refire, automatic air regulation, new XT40 torch body shops, prototyping
60 A at 50% 7/8 in. 7/8 in. 5/8 in. Auto-Refire, Rated Cutting Thicknesses*
automatic air regulation, only 52 lb. Construction, maintenance/repair, fabrication
208: 60 A at 40% 7/8 in. 7/8 in. 5/8 in. Auto-Line : 208 – 575 V, Auto-Refire, Construction, maintenance/repair, fabrication
230–380 V: 60 A at 50% automatic air regulation
380–575 V: 60 A at 60%
Engine-Driven Generator Spectrum 375 X-TREME Spectrum 625 X-TREME Spectrum 875/875 Auto-Line
Welders Power Steel Cut Output Amp Setting** Steel Cut Output Amp Setting** Steel Cut Output Amp Setting**
Wildcat® 200 6.5 kW 3/8 in. 30 A 3/8 in. 30 A Not Recommended Not Recommended
Bobcat, Trailblazer® 11 kW 3/8 in. 30 A 5/8 in. 40 A 1/2 in. 45 A
Big Blue® 300 Pro 12 kW 3/8 in. 30 A 5/8 in. 40 A 5/8 in. 50 A
Big Blue® 350 PipePro®
Big Blue® 500 CC/CV 20 kW (optional) 3/8 in. 30 A 5/8 in. 40 A 7/8 in. 60 A
*Note on cut capacity ratings: The Spectrum Series rating system is designed to provide a guide to help our customers choose the right machine for their application. Rated cut
capacity is based on traveling approximately 15 inches per minute to achieve a steady, precise cut. This is the key rating that should meet or exceed your typical cutting thickness
requirements. Sever cut is the maximum cut achieved in ideal conditions. Some factors that dictate actual cut speeds, thickness capacity and duty cycles are: types of thermally
conductive material being cut, available input power, output power settings and operator technique. For aluminum and other metals with high thermal conductivity, cutting capacities
may be derated as much as 30 percent.
PRODUCT KEY
PLASMACUTTERS
MillerWelds.com/PlasmaCutters
CLASS: Light Industrial Industrial Heavy Industrial CAPABILITY: Designed for this process Capable of this process
New! or Improved! products appear in blue type. *See note on cut capacity ratings above. **240 V, full KVA plug. Derate cut capacity with less generator power.
For more detailed information, see individual specification sheets.
Scan this tag to see
videos on new XT torch
and Spectrum plasma
cutters.